GrandAmGT.com Forum
http://www.pfyc.com GrandAmGT.com Premium Memership Signup
MilzyMotorsports.com   

Go Back   GrandAmGT.com Forum > GAGT - Technical - Sponsored by www.MilzyMotorSports.com > Technical Q&A

Reply
 
Thread Tools Display Modes
Old 10-08-2009, 08:06 AM   #1
pauljs75
GAGT - Member
 
pauljs75's Avatar
 
Join Date: Feb 2006
Location: Waukegan IL
Posts: 134
Vehicle: 2001 Grand AM GT Sedan
pauljs75 Gettin' there
Angry Stuck O2 Sensor...

It's one of the parts where you can actually reach it. (The code was for the top O2 sensor.) So I figured it was an ok DIY jobber. Even got the right socket, and with a short extension there's just barely enough room near the firewall to put some torque on it, but it's manageable.

The problem is that is stuck. It seems most places say to heat it up, but I don't have a blow-torch and driving it to get it hot didn't help too much either. Any other tricks particular to the LA1 V6 for breaking those things loose? All I've suceeded in doing was rocking the car back and forth.

Since I have a short amount of time (emissions check coming up), I think I may have to resign and go to the shop. Hopefully it'll just be labor, because I did get the correct replacement. Just sucks that it's this close to being done, and the thing won't budge.
pauljs75 is offline   Reply With Quote
Old 10-08-2009, 08:10 AM   #2
Lab Rat
Fear the Four
 
AKA: Craig
Join Date: Jul 2005
Location: Kenosha, Wi.
Posts: 452
Vehicle: 2000 Grand Am SE
Lab Rat Gettin' there
Try the product PB Blaster. This is really good liquid wrench. Let it sit, maybe even overnight, and it MAY come loose. I did get it off my 2.4 and it should be similar.
__________________
Lab Rat
Fear the Four
Lab Rat is offline   Reply With Quote
Old 10-08-2009, 08:18 AM   #3
lvemy3100
Im President Charley
 
lvemy3100's Avatar
 
AKA: mp
Join Date: Dec 2005
Location: place
Posts: 2,040
Vehicle: 01 car
lvemy3100 a trusted member
Send a message via AIM to lvemy3100
Quote:
Originally Posted by Lab Rat View Post
Try the product PB Blaster. This is really good liquid wrench. Let it sit, maybe even overnight, and it MAY come loose. I did get it off my 2.4 and it should be similar.
x2

be sure to spray it 2 or more times if you are letting it sit for any amount of time... more is definitely better in this case
__________________
-Mark


You want more power? You need MP Racing!

------

Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast.
lvemy3100 is offline   Reply With Quote
Old 10-08-2009, 08:19 AM   #4
AaronGTR
BlingWithBallz
 
AaronGTR's Avatar
 
AKA: Aaron
Join Date: Aug 2002
Location: Detroit area, MI
Age: 39
Posts: 12,197
Vehicle: 2000 Grand Am GT1 2dr
AaronGTR has made plenty of valid pointsAaronGTR has made plenty of valid points
Yeah, you usually need to spray some kind of penetrating oil on it, and sometimes let it soak over night, to get them loose if it's the original sensor and never been removed. If that doesn't work then usually a propane torch. You have to heat up the manifold to get the metal to expand and loosen up around the sensor. If you don't have a torch, the other option that may work is... run the car until the manifold is hot, then try and break the sensor loose. Just gotta work fast, and wear some gloves 'cause it's gonna be toasty under there!
__________________
The few, the proud, the boosted!
13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011)
See it here. the total package.
AaronGTR is offline   Reply With Quote
Old 10-08-2009, 09:00 AM   #5
SSRacer
Speed Racer
 
SSRacer's Avatar
 
AKA: Sean
Join Date: Mar 2003
Location: Somewhere
Age: 39
Posts: 1,440
Vehicle: 2002 Grand Am GT Sedan
SSRacer Gettin' there
I hit mine with some penetrating spray and let it sit for a few hours. When I went back it came out with relatively little effort.
__________________
2002 Pontiac Grand Am GT1
http://cardomain.com/id/ssgohan

Don't take life too seriously, you'll never get out alive.
If it ain't broke, don't Microsoft it.
SSRacer is offline   Reply With Quote
Old 06-17-2011, 02:19 PM   #6
STFDFireman
GAGT - Newbie
 
AKA: Dean
Join Date: Jul 2008
Location: Dayton OH
Posts: 7
Vehicle: 2002 Grand Am Gt Sedan
STFDFireman Gettin' there
can anyone post a pic as to where this is?? I cannot find mine to save my life!!!
STFDFireman is offline   Reply With Quote
Old 06-17-2011, 04:58 PM   #7
MMGT1
GAGT - Member
 
MMGT1's Avatar
 
AKA: Paul
Join Date: Oct 2005
Location: Canada
Age: 45
Posts: 345
Vehicle: 2000 Firebird TA WS6
MMGT1 Gettin' there
Its right up top in your rear exhaust manifold bud, you can't miss it. I dont have a factory manifold anymore so a pic of mine is useless.

Also guys, once you have let the penetrating fluid soak in, give it a little twist to the right** yea, tighten it more... You should be able to crack the rust that way resulting in little to no damage to the face that will have torque applied to take it out. If it feels like its binding coming out, work it in and out to clear the rust so you will do as little damage as possible to the threads in your manfold. Use anti-sieze on your new sensor and only apply it to the top third of the threads, closest to the wire.

Last thing you want to do is strip it and have to have a shop charge you out the "you know what" to get it. Hope it helps!
MMGT1 is offline   Reply With Quote
Old 06-17-2011, 05:17 PM   #8
SC/T02
Old School Pontiac
 
SC/T02's Avatar
 
AKA: Adam
Join Date: Oct 2002
Location: Eighty Four, PA
Age: 33
Posts: 1,048
Vehicle: '99 30th TA/08-09 G8
SC/T02 Gettin' there
Send a message via AIM to SC/T02
PB Blaster is awesome. Look for a white bottle that looks to have a lot of different writting with a lot of different scripts on it. Stuff is the sh!t. Sometimes they have a yellow cap. You can get it at Big Lots, Target, Wal-Mart, K-Mart, most stores have ot. Never looked for it at an auto store. I have even seen a small spray bottle at the Dollar Tree before. You will want to spray the crap out of it then let it sit for hours.
__________________
You know better then to Hassel the Hoff!

www.TheAutoNation.org
SC/T02 is offline   Reply With Quote
Old 06-17-2011, 08:59 PM   #9
Malaclypse
Wrenched Loose
 
AKA: Scott
Join Date: Sep 2004
Location: Austin, TX
Posts: 1,209
Vehicle: 2013 Malibu 2LT
Malaclypse a trusted member
I'll reccomend PB blaster as well. That or a bigger ratchet. I usualy use a 16" 3/8" ratchet with a 6" extension and the correct socket. Make sure that the socket is 6 point, though or it may round off the sensor.

It helps sometimes if the ratchet has a locking flex handle. I swear by those damn things.
Malaclypse is offline   Reply With Quote
Reply

Tags
diy, seized, sensor, stuck

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:08 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com
MilzyMotorsports.com