Brand new 3500 WOT TECH ported parts for sale

[gectek]

So far i sold one LIM. The s/s one. I have both the UIMs one is street strip (s/s) the other is race/boost r/b. Also have one LIM left, it is r/b. I also have a new set of 3500 heads. they are bare. also ported by WOT Tech. The heads are a street strip. All these parts are brand new, never even touched an engine. They were purchased directly from GM and then sent for porting.

Uppers are $80 shipped (to the lower 48)
Lower is $100 shipped

The heads are $380 shipped for the pair.

I can ship them to anywhere else, it would just cost regular shipping on top.

Here are the pics

race/boost over s/s

gasket on s/s

race/boost upper

[gectek]

ill have to take pics of heads if you want them

[zukiracer19]

Ill take the UIM and LIM, but question, not having ported heads wouldn't that cause like a windtunnel effect and not really get any gains from the porting?

[gectek]

no you will get a gain def. it would be better with the heads, but i ran ported manis for about a year with no bad effects and it boosted my perf definately. ran a 15.00 in terrible DA.

if you are locked in on the manifolds (im guessing race boost on both) then ill pm you my details.

[gectek]

i was using WOT ported 3400 manis for reference...it gained over the stock. the 3500 manis are alot larger port, so they will flow even more.

[sruiz2169]

is it ok to use a r/b LIM if you aren't currently boosted?

[gectek]

they plenum is designed for race/boost with a larger area in mind for the runners. you can run it, but i most def would not on a stock engine.

[NJGrandAm01]

will the 3500 LIM fit on the 3400 heads?

[gectek]

These parts are for a 3500 engine though or for use with a 3500 top end swap. you can use the upper intake on a 3400 lower or use a 3400 upper on a 3500 lower, but in this case a 3500 lower has to be used in conjunction with 3500 heads. as far as i know the 3500 lower will not work on 3400 heads. you can ask ben over on 60* or on here, but as far as i know, they wont work. they are a slightly different port.

[NJGrandAm01]

is the 3500 UIM spoken for? if not i get paid friday. id like to get my hands on them. so if they are still available, i'd like it.

[gectek]

zuki asked about the set, but they are not spoken for. actually until i get money for them, they are free game. i still have both the race boost and the street strip upper, so choose accordingly.

[NJGrandAm01]

whats the difference? they're both 3500 UIMs?

[gectek]

yes they are both 3500 uims, one is opened up alot more to work with the race boost lower intake. if you were to use it on a 3400 lower, i would def look at at least trying to get the surfaces to match on the gasket end. meaning some slight porting of the 3400 lower on the gasket surface if you were to use the race boost. there are a few more problems that are not addressed. the 3500 upper uses a different bolt pattern for the TB as well as taking a different map sensor style and EVAP solenoid. actually now that i think about it, there are a few things that would make the swap kind of harder to do. of course this happens with any part really. but i am just pointing out these things so they do not come as such a suprise later on. the TB adapter is avail from TCE or WOT Tech. the egr is the same though. the map i can provide and the evap solenoid too. let me find out the price and i can include it as a package deal.

[NJGrandAm01]

what do you want fro the street UIM? do you ahve the gaskets? will that bolt on to the 3400 stock LIM and stock TB?

[NJGrandAm01]

the 3400 TB bolt pattern is different. ok. so let me know what you have that your willing to sell with this to make this a little easier.

[burgett2103]

is your last lim ported?

[stewartfn18]

just to clear some things up inb this thread, the 3500 LIM will ONLY work with the 3500 heads. the only combo that you can use between teh 3400 qnd 3500 is 3500 heads with 3500 LIM and 3400 UIM . also when using the 3500 UIM, an adapter is needed for the 3400 or tce tb as the bolt pattern is different. and not completely needed but recommened is the fpr adapter since the 3500UIM is longer

[gectek]

yes all of these parts are ported. ill see what i can do to help with anything i can.

[zukiracer19]

Quick question, Will these fit on 3400 heads? if so im putting money in the bank and ill send it through paypal ASAP.

[SilverGAGT2002]

Quick question, Will these fit on 3400 heads? if so im putting money in the bank and ill send it through paypal ASAP.

just to clear some things up inb this thread, the 3500 LIM will ONLY work with the 3500 heads. the only combo that you can use between teh 3400 qnd 3500 is 3500 heads with 3500 LIM and 3400 UIM . also when using the 3500 UIM, an adapter is needed for the 3400 or tce tb as the bolt pattern is different. and not completely needed but recommened is the fpr adapter since the 3500UIM is longer

...