Possible new look :) - Page 5

Silversmok3 · 05-19-2010, 11:12 PM

You could pull off the 20" rims...IF you got rid of the wing, switched up the bumpers, and lost the stripes.Too much detail ruins the look.

Stefalicious · 05-23-2010, 10:34 AM

Will these fit my car, like the bolt pattern and everything??

http://cgi.ebay.com/ebaymotors/18-EV...Q5fAccessories

2000 GT Coupe · 05-23-2010, 01:09 PM

Should fit fine

Stefalicious · 05-23-2010, 05:11 PM

Quote:

Originally Posted by Silversmok3

You could pull off the 20" rims...IF you got rid of the wing, switched up the bumpers, and lost the stripes.Too much detail ruins the look.

Wing may change VERY soon, bumper and stripes are goin nowhere. Ive changed my mind bout the 20s though, i dont wanna change the whole theme of my car.....soooooo id rather go with 18s and drop it an inch or two.

Quote:

Originally Posted by 2000 GT Coupe

Should fit fine

Great, thanx.

AaronGTR · 05-23-2010, 07:24 PM

Yeah, those should fit your car. It would be better if they had a 35mm offset, but they are only 7.5" wide so with a 42mm offset you should still have enough room on the inside to keep them from rubbing. You'll definitely want to stick with a 225 width tire though. The bolt pattern is good, the center bore is good, so they should fit fine.

Stefalicious · 05-23-2010, 10:12 PM

Quote:

Originally Posted by AaronGTR

Yeah, those should fit your car. It would be better if they had a 35mm offset, but they are only 7.5" wide so with a 42mm offset you should still have enough room on the inside to keep them from rubbing. You'll definitely want to stick with a 225 width tire though. The bolt pattern is good, the center bore is good, so they should fit fine.

Perfect, Thanx. I really want them now. Luckily there not too tooo expensive. And im thinkin about takin the spoiler off and getting something a lot smaller, then maybe you will wanna see my car .

cmtapanes · 05-23-2010, 10:25 PM

Hey Aaron... so when are we doing the GA get together? and the dyno day

Stefalicious · 05-24-2010, 10:35 AM

Quote:

Originally Posted by cmtapanes

Hey Aaron... so when are we doing the GA get together? and the dyno day

OMFG if yall are getting together yall better let my ass know, i wanna finally meet some people on here.

. And i can get Darius (Grandamboi) to come too.

stewartfn18 · 05-24-2010, 10:50 AM

Quote:

Originally Posted by cmtapanes

Hey Aaron... so when are we doing the GA get together? and the dyno day

i think that all of the cars associated should be running correctly before we throw them on the dyno. I.E your car and my car

Stefalicious · 05-24-2010, 10:54 AM

Quote:

Originally Posted by cmtapanes

Hey Aaron... so when are we doing the GA get together? and the dyno day

Quote:

Originally Posted by stewartfn18

i think that all of the cars associated should be running correctly before we throw them on the dyno. I.E your car and my car

....so tru. hahaha

AaronGTR · 05-24-2010, 03:44 PM

Haha, yeah.... haven't really set any dates yet. We where just talking about maybe setting up a day to rent a dyno out for a group of us, and maybe going to the drag strip another day after that.

Definitely gotta get all the cars running well on the street first. David and Carlos' cars have some issues we are trying to fix. No point in dyno'ing them until they aren't getting KR at WOT etc. Not sure how Mac's car is running, but should be fine last I heard from him. Mine isn't too bad... some minor tweeks needed is all.

Once everyone is set I'll definitely send out some PM's or start a thread and see if we can work out a day everyone can make it. Anyone in the area that wants to come is invited of course.

cmtapanes · 05-24-2010, 06:45 PM

so how many of us on the Tampa area? Active members

AaronGTR · 05-24-2010, 06:51 PM

Well, at least four of us here in the Tampa area, possibly more. And Stephanie and Darius from Orlando area if they are in, and anyone else from the Orlando area that might want to come. I guess we could figure that out when we get closer to when we're ready to do it, but might want to give some peeps a shout to let 'em know it's coming and make sure their cars are running good.

Sorry Steph... seems like we're takin' over your thread.

Stefalicious · 05-24-2010, 07:50 PM

Quote:

Originally Posted by AaronGTR

Haha, yeah.... haven't really set any dates yet. We where just talking about maybe setting up a day to rent a dyno out for a group of us, and maybe going to the drag strip another day after that.

Definitely gotta get all the cars running well on the street first. David and Carlos' cars have some issues we are trying to fix. No point in dyno'ing them until they aren't getting KR at WOT etc. Not sure how Mac's car is running, but should be fine last I heard from him. Mine isn't too bad... some minor tweeks needed is all.

Once everyone is set I'll definitely send out some PM's or start a thread and see if we can work out a day everyone can make it. Anyone in the area that wants to come is invited of course.

Oh ya deff get yall cars in good shape, you wanna try to get the best read possible. Im prob not gonna run mine but i deff wanna meet with yall for sure. Juss try to make a date at least a month in advance, I now it will be hard that far in advance but my job are real ****s about it.

I gotta make sure i have time to request the day off, especially if its a Sat.

Quote:

Originally Posted by AaronGTR

Well, at least four of us here in the Tampa area, possibly more. And Stephanie and Darius from Orlando area if they are in, and anyone else from the Orlando area that might want to come. I guess we could figure that out when we get closer to when we're ready to do it, but might want to give some peeps a shout to let 'em know it's coming and make sure their cars are running good.

Sorry Steph... seems like we're takin' over your thread.

Theres prob like 5 or 6 of us im thinkin. And dont worry bout it, i really wanna get a day for everyone to get together.

zukiracer19 · 05-24-2010, 09:41 PM

im about half tempted to get me these http://cgi.ebay.com/ebaymotors/17-EV...item35a99b9774

Mac0083 · 05-25-2010, 04:17 AM

Why would you do that, Zuki? getting tired of those fabulous pink/purple rims?

Exodus · 05-25-2010, 08:10 AM

I agree w/ some.... cars too over done w the spoiler, rims and that hideous kit...
I would although like to compliment you on your cleavage

Stefalicious · 05-25-2010, 12:58 PM

Quote:

Originally Posted by zukiracer19

im about half tempted to get me these http://cgi.ebay.com/ebaymotors/17-EV...item35a99b9774

Those look nice, they kinda look likt the ones i have noe juss not the same color.

Quote:

Originally Posted by Exodus

I agree w/ some.... cars too over done w the spoiler, rims and that hideous kit...
I would although like to compliment you on your cleavage

Thanx but........NO THANX. Douch

Exodus · 05-25-2010, 01:18 PM

Quote:

Originally Posted by Stefalicious

Those look nice, they kinda look likt the ones i have noe juss not the same color.

Thanx but........NO THANX. Douch

meh, you're busted looking anyway

stewartfn18 · 05-25-2010, 01:58 PM

Quote:

Originally Posted by Stefalicious

Theres prob like 5 or 6 of us im thinkin. And dont worry bout it, i really wanna get a day for everyone to get together.

theres also some people from foreverpontiac.com from the area too prolly about 2 or 3

05-23-2010, 01:09 PM	#83
2000 GT Coupe Made the move :D AKA: Gene Join Date: Jan 2009 Location: Jax Florida Posts: 1,416 Vehicle: 00 Grand Am GT1 Coupe	Should fit fine __________________ 2000 Grand Am GT1 Camaro brake upgrade Goodridge G-Stop SS brake lines MP Racing CAI and tuned PCM LED tails Projector's with HID's Lowered 18" Rims Aftermarket front and rear anti-sway bars

05-23-2010, 07:24 PM	#85
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Yeah, those should fit your car. It would be better if they had a 35mm offset, but they are only 7.5" wide so with a 42mm offset you should still have enough room on the inside to keep them from rubbing. You'll definitely want to stick with a 225 width tire though. The bolt pattern is good, the center bore is good, so they should fit fine. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

05-24-2010, 03:44 PM	#91
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Haha, yeah.... haven't really set any dates yet. We where just talking about maybe setting up a day to rent a dyno out for a group of us, and maybe going to the drag strip another day after that. Definitely gotta get all the cars running well on the street first. David and Carlos' cars have some issues we are trying to fix. No point in dyno'ing them until they aren't getting KR at WOT etc. Not sure how Mac's car is running, but should be fine last I heard from him. Mine isn't too bad... some minor tweeks needed is all. Once everyone is set I'll definitely send out some PM's or start a thread and see if we can work out a day everyone can make it. Anyone in the area that wants to come is invited of course. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

05-24-2010, 06:51 PM	#93
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Well, at least four of us here in the Tampa area, possibly more. And Stephanie and Darius from Orlando area if they are in, and anyone else from the Orlando area that might want to come. I guess we could figure that out when we get closer to when we're ready to do it, but might want to give some peeps a shout to let 'em know it's coming and make sure their cars are running good. Sorry Steph... seems like we're takin' over your thread. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

05-25-2010, 08:10 AM	#97
Exodus Down Rodeo AKA: Minchione Join Date: Jul 2005 Location: Marlboro/LBI, NJ Age: 39 Posts: 1,734 Vehicle: 12 Altima \| 08 TL/S	I agree w/ some.... cars too over done w the spoiler, rims and that hideous kit... I would although like to compliment you on your cleavage __________________ Choices always were a problem for you. What you need is someone strong to guide you. Deaf and blind and dumb and born to follow, What you need is someone strong to use you —Opiate, T O O L

05-19-2010, 11:12 PM	#81
Silversmok3 Fire-Am AKA: DT Join Date: Mar 2009 Location: Rapid City, South Dakota Posts: 91 Vehicle: 2000 Grand Am SE1	You could pull off the 20" rims...IF you got rid of the wing, switched up the bumpers, and lost the stripes.Too much detail ruins the look.

05-23-2010, 10:34 AM	#82
Stefalicious GAGT - Member AKA: Stephanie Join Date: May 2009 Location: Lakeland, FL Posts: 400 Vehicle: 99 Grand AM GT Coupe	Will these fit my car, like the bolt pattern and everything?? http://cgi.ebay.com/ebaymotors/18-EV...Q5fAccessories

05-23-2010, 10:25 PM	#87
cmtapanes GAGT - Member AKA: Carlos Join Date: Jan 2006 Location: Ruskin, Florida Age: 45 Posts: 608 Vehicle: 1999 Grand Am Coupe	Hey Aaron... so when are we doing the GA get together? and the dyno day

05-24-2010, 06:45 PM	#92
cmtapanes GAGT - Member AKA: Carlos Join Date: Jan 2006 Location: Ruskin, Florida Age: 45 Posts: 608 Vehicle: 1999 Grand Am Coupe	so how many of us on the Tampa area? Active members

05-24-2010, 09:41 PM	#95
zukiracer19 BoOsTiN' AKA: slograndam Join Date: Sep 2007 Location: State College, PA Posts: 2,700 Vehicle: ev0m0de	im about half tempted to get me these http://cgi.ebay.com/ebaymotors/17-EV...item35a99b9774

05-25-2010, 04:17 AM	#96
Mac0083 User account under probation AKA: Mac Join Date: Feb 2010 Location: Tampa Florida Age: 37 Posts: 349 Vehicle: 99 GT Coupe	Why would you do that, Zuki? getting tired of those fabulous pink/purple rims?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode