Milzy Motorsports headers with PICTURES! - Page 8

slw240sx · 07-26-2011, 11:49 AM

Quote:

Originally Posted by SilverGAGT2002

Is there a way to contract you on the side for a possible faster shipping timeframe? Or is that against your policy with MMS? I may need a set of turbo headers from you...you do good work no doubt.

no i can not make the on the side. i do know for a fact that i have a set of front and rear headers already made for a turbo setup. i also have a down pipe already made. The only thing that needs made is the crossover pipe. I can make one of those in a day or two. from there the coating takes 2- to what ever weeks.

thats said i can say that shipping time on that kit should be faster then a normal set seeing that we have it 80% pre made.

Jon

2kSCT · 07-26-2011, 11:32 PM

Can my headers be gold plated? That'd be sweeeeet.

SilverGAGT2002 · 07-27-2011, 06:26 AM

Quote:

Originally Posted by slw240sx

no i can not make the on the side. i do know for a fact that i have a set of front and rear headers already made for a turbo setup. i also have a down pipe already made. The only thing that needs made is the crossover pipe. I can make one of those in a day or two. from there the coating takes 2- to what ever weeks.

thats said i can say that shipping time on that kit should be faster then a normal set seeing that we have it 80% pre made.

Jon

How much are the turbo headers alone?

slw240sx · 07-27-2011, 11:08 AM

Quote:

Originally Posted by SilverGAGT2002

How much are the turbo headers alone?

you would have to call or email mike. i really have nothing to do with pricing i just build the stuff. but ball park is probably 1600

unchained_01 · 07-27-2011, 11:48 AM

Any word on the headers ? I have sent several emails and numerous unanswered calls

07-27-2011, 11:59 AM

Quote:

Originally Posted by 2kSCT

Can my headers be gold plated? That'd be sweeeeet.

slap

slw240sx · 07-27-2011, 03:19 PM

Quote:

Originally Posted by unchained_01

Any word on the headers ? I have sent several emails and numerous unanswered calls

of course... what down pipe did you have with yours? catted or non catted?

ill get mike to give you a ring or email.

unchained_01 · 07-27-2011, 03:23 PM

I just got an email from him with the details. Idk he was on vaca. But suspected as much also left him a voicemail. Thanks Jon btw. Hi flow cat , the works. Also am I gonna need a flange for my Borla cat back ? Plan to install at the same time with a wideband so I can finally mount the Magnuson S/C on this motor until my other block is finished

SilverGAGT2002 · 07-27-2011, 06:20 PM

$1600? Im better off buying the entire kit from him then

2kSCT · 07-27-2011, 07:11 PM

Quote:

Originally Posted by unchained_01

I just got an email from him with the details. Idk he was on vaca. But suspected as much also left him a voicemail. Thanks Jon btw. Hi flow cat , the works. Also am I gonna need a flange for my Borla cat back ? Plan to install at the same time with a wideband so I can finally mount the Magnuson S/C on this motor until my other block is finished

What were the details? Get a shipping date or anything?

slw240sx · 07-28-2011, 11:49 AM

Quote:

Originally Posted by unchained_01

I just got an email from him with the details. Idk he was on vaca. But suspected as much also left him a voicemail. Thanks Jon btw. Hi flow cat , the works. Also am I gonna need a flange for my Borla cat back ? Plan to install at the same time with a wideband so I can finally mount the Magnuson S/C on this motor until my other block is finished

the flange that is on the down pipe is for a stock catback, so if the borla has the stock flange you should be good to go.

Jon

slw240sx · 07-28-2011, 12:15 PM

Quote:

Originally Posted by SilverGAGT2002

$1600? Im better off buying the entire kit from him then

thats is all the hot parts i believe, which is not a simple task, they are way way more labor intensive then the NA headers. thats front and rear header, crossover, and the downpipe. their is a reason they are sold as kits. that way you do not need to piece together all the other parts just have to get it on the car and tuned.

now if you buy a lot of used stuff you can probably do it fairly cheap after the hot parts are purchased. trust me i have seen some home made hot parts and they just are not worth the effort to buy used.

SilverGAGT2002 · 07-28-2011, 01:34 PM

Might aswell do it right the first time and just order the kit from MMS. Im about to buy a spare GA for $400 to make it a project vehicle.

zukiracer19 · 07-28-2011, 01:38 PM

be sure to get a open cutout... and dont even use your muffler... or cat period... just leave the biotch open the entire time... fast spools, loud turbo, sounds like a v8 monster powerhouse.

SilverGAGT2002 · 07-28-2011, 06:42 PM

Quote:

Originally Posted by zukiracer19

be sure to get a open cutout... and dont even use your muffler... or cat period... just leave the biotch open the entire time... fast spools, loud turbo, sounds like a v8 monster powerhouse.

Lol awesome

unchained_01 · 07-28-2011, 07:11 PM

There is light at the end of the tunnel !! Mike called to verify my order and I will be getting a tracking number

AaronGTR · 07-28-2011, 08:20 PM

Quote:

Originally Posted by zukiracer19

be sure to get a open cutout... and dont even use your muffler... or cat period... just leave the biotch open the entire time... fast spools, loud turbo, sounds like a v8 monster powerhouse.

The moron speaks....

Shade2012 · 07-28-2011, 08:27 PM

Ahahaha, I was just thinking that!

2kSCT · 07-29-2011, 01:51 PM

Looks like I might have my headers before Christmas after all....

unchained_01 · 08-02-2011, 06:22 PM

Got my headers today !! Very nicely done Jon. Thank you

07-27-2011, 11:48 AM	#145
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	Any word on the headers ? I have sent several emails and numerous unanswered calls __________________ Building my own concept

07-27-2011, 03:23 PM	#148
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	I just got an email from him with the details. Idk he was on vaca. But suspected as much also left him a voicemail. Thanks Jon btw. Hi flow cat , the works. Also am I gonna need a flange for my Borla cat back ? Plan to install at the same time with a wideband so I can finally mount the Magnuson S/C on this motor until my other block is finished __________________ Building my own concept Last edited by unchained_01; 07-27-2011 at 03:27 PM.

07-27-2011, 06:20 PM	#149
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	$1600? Im better off buying the entire kit from him then __________________ Nothing Coming soon!

07-28-2011, 01:34 PM	#153
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	Might aswell do it right the first time and just order the kit from MMS. Im about to buy a spare GA for $400 to make it a project vehicle. __________________ Nothing Coming soon!

07-28-2011, 07:11 PM	#156
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	There is light at the end of the tunnel !! Mike called to verify my order and I will be getting a tracking number __________________ Building my own concept

07-26-2011, 11:32 PM	#142
2kSCT GAGT - Member AKA: Andrew Join Date: May 2011 Location: Riverside, CA Posts: 31 Vehicle: 2000 GT/SCT Sedan	Can my headers be gold plated? That'd be sweeeeet.

07-28-2011, 01:38 PM	#154
zukiracer19 BoOsTiN' AKA: slograndam Join Date: Sep 2007 Location: State College, PA Posts: 2,700 Vehicle: ev0m0de	be sure to get a open cutout... and dont even use your muffler... or cat period... just leave the biotch open the entire time... fast spools, loud turbo, sounds like a v8 monster powerhouse.

07-28-2011, 08:27 PM	#158
Shade2012 GAGT - Senior Member AKA: Logan Join Date: Jul 2010 Location: Carlinville, Illinois Posts: 1,176 Vehicle: 2000 Grand Am GT Coupe	Ahahaha, I was just thinking that!

07-29-2011, 01:51 PM	#159
2kSCT GAGT - Member AKA: Andrew Join Date: May 2011 Location: Riverside, CA Posts: 31 Vehicle: 2000 GT/SCT Sedan	Looks like I might have my headers before Christmas after all....

08-02-2011, 06:22 PM	#160
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	Got my headers today !! Very nicely done Jon. Thank you __________________ Building my own concept

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode