Carbon Fiber SC/T Spoiler

[TruGreenGAGT]

Well after numerous emails and trying to track down someone I finally got in contact with a person. Long story short when I purchased My spoiler I was told by the company they had a few left, they shorty went out of business. Fast track a few yrs and they are back under a different name but still checked emails an what not from old company..... So they replied to my inquire about having any left or the mold to make more. They no longer have the SC/T mold but had 3 Spoilers left from when they were first made. So I am in the process of purchasing all 3 spoilers just to list here for re-sale. To recap the best of my knowledge only 6 CF SC/T Spoilers were ever produced.
Me and Steven (Sruiz2169) each have 1, so include these that make 5 in total that are still left.

I'm selling for $300 or Best Offer (Please no low ballers) Plus shipping to anywhere in the US, Canada, or Mexico.
Payment by Paypal or cash in person would be best.

Now at the moment I don't have these so no payment will be required until I actually receive them which should be within the next week or so. Then I will send out PM or Email to the 3 buyers, with the required payment info. Also the first 3 people that contact me with cash in hand is who will receive one spoiler.

The company also sent me a few pictures to show one of the spoilers





Again if you're interested in one of the spoilers either PM here or email me at holmesjp87@comcast.net

Thanks for looking

[cobrajeff92]

Hmmm tempting

[CycloneGA]

Damn thats very tempting

[TruGreenGAGT]

ya Only 5 known to be produced and these made from real CF not wrapped over anything, I've got pics floating around of mine mounted and so does Steven

[TruGreenGAGT]

1 sold pending arrival

that leaves 2 still up for grabs

[sleepyalero]

if that would sit on the stock spoiler holes on the trunk for my alero i would totally get one from you. would it?

[TruGreenGAGT]

thats a really good question, might have to make a JY run an pull a spoiler from a GA an test it on an Alero......or take some measurements of my bolt locations and compare to yours??


EDIT: heres a picture I found online, then I measured my bolt locations, and labeled them. I have a feeling the Alero may be smaller on the pillers, from the photo I also found online it appears closer together. But measure your bolts an post it here for comparison

[sleepyalero]

Originally Posted by TruGreenGAGT

thats a really good question, might have to make a JY run an pull a spoiler from a GA an test it on an Alero......or take some measurements of my bolt locations and compare to yours??


EDIT: heres a picture I found online, then I measured my bolt locations, and labeled them. I have a feeling the Alero may be smaller on the pillers, from the photo I also found online it appears closer together. But measure your bolts an post it here for comparison

awesome thank you for that, ill ask about measurments on aleromod... i would measure mine, but my car is at Milzy Motorsports for the 6 speed right now.

[TruGreenGAGT]

no worries, and hey if they dont line up exactly, can always drill new holes and have the spoiler cover the old

[sleepyalero]

^ yes... and no. i rather just have it match up with stock holes.

[TruGreenGAGT]

well heres a pic of an Alero spoiler I found showing the bolts and if you compare the pics, the Alero seem different.
Pillars I'm sure are closer then 7 inches, and the angle doesn't seem as extreme.
but find someone on aleromod to get you some measurements to be 100% sure

[tw0123]

the picture you showed of the measurements look like the normal grand am spoiler, not the sc/t version... not sure if they are the same though? I also thought about one of these to match my carbon fibre cowl hood...

[TruGreenGAGT]

the bolts are in the same location on both stock and SC/T spoilers.
was easier to find a stock spoiler for the measurement diagram, than searching all over for a pic of a SC/T underside.
but I can assure that its the same as I swapped my stock spoiler for the CF one with out drilling new holes


so looks like someone needs to measure up an alero spoiler and post here, or I gotta make a JY run to find out.
either way I think one of these would look killer on an Alero, even if new holes do need to be drilled

[sleepyalero]

so tempting.......

[SpyhunteR]

Originally Posted by sleepyalero

so tempting.......

so you won't buy it is what you are saying.

[TruGreenGAGT]

well small update
these will be shipped out this Thur, meaning i should have them by mid next week and can throw some pics up of each spoiler

[BJPbrandon2448]

Jim im really debating this... Im just so short on money right now based on the paint work im having done! I really would like to have one... so Im hoping you have one left by my next paycheck.

[sleepyalero]

Originally Posted by SpyhunteR

so you won't buy it is what you are saying.

well, i wasnt saying i wouldn't buy one... i ment tempting as in making new holes and stuff... but by the time i had the money.... they would most likely be sold, because im still waiting to pay for other parts from MMS because my car is there right now. so money is tight atm.

[TruGreenGAGT]

2 sold pending arrival

that leaves 1 still up for grabs

[sleepyalero]

^ told you Spy they would most likely be gone.. haha.