HIDs with projectors - Page 2

unchained_01 · 10-28-2012, 12:25 PM

what bulbs are in there now ?

msmith1956 · 10-28-2012, 01:00 PM

Most of those use a 9006 for a low beam and H1 for high.

xalteph · 10-28-2012, 01:37 PM

Is there a way to check what bulb they are? They don't say on the bulb.

2000 GT Coupe · 10-28-2012, 06:13 PM

Quote:

Originally Posted by xalteph

Is there a way to check what bulb they are? They don't say on the bulb. The halogen lows look like this http://www.h1bulb.com/images/H1_Halogen_Bulb.jpg

That is a H1 it actually says that in the image link as well.
If that is what your bulb looks like then it is.

xalteph · 11-11-2012, 12:13 PM

Does anyone know how you would make that cutoff shield straight?

unchained_01 · 11-11-2012, 02:22 PM

Disassemble projector and cut the shield straight Reassemble

TDavis · 11-11-2012, 03:42 PM

Quote:

Originally Posted by xalteph

Does anyone know how you would make that cutoff shield straight?

I have no idea why yours are like that. Mine wheren't like that at all.

http://www.houseofthud.com/cartech/hids/

unchained_01 · 11-11-2012, 11:22 PM

Yeah mine arent like that Mine are from retrofitsource And I had the cut offs upgraded before they were sent. It's been a whole I forgot

xalteph · 11-14-2012, 10:00 PM

Quote:

Originally Posted by DrFabulous

Or the headlights aren't installed correctly. OP, make sure those metal tabs are locked down on all the adjustment tabs on the headlights... I know they suck, but if you miss one of them, it could throw everything off.

Is there a certain way to lock in that bottom adjustment tab? I can't get to it when installing the head light.

10-28-2012, 12:25 PM	#21
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	what bulbs are in there now ? __________________ Building my own concept

10-28-2012, 01:37 PM	#23
xalteph - AKA: Xalteph Join Date: May 2012 Location: US Posts: 138 Vehicle: 2002 Grand Am GT 3400	Is there a way to check what bulb they are? They don't say on the bulb. Last edited by xalteph; 05-21-2013 at 03:03 PM.

11-11-2012, 02:22 PM	#26
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	Disassemble projector and cut the shield straight Reassemble __________________ Building my own concept

11-11-2012, 11:22 PM	#28
unchained_01 Manic Mechanic AKA: albert Join Date: Dec 2010 Location: cumberland md Age: 59 Posts: 677 Vehicle: 2003 grand am gt	Yeah mine arent like that Mine are from retrofitsource And I had the cut offs upgraded before they were sent. It's been a whole I forgot __________________ Building my own concept

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-28-2012, 01:00 PM	#22
msmith1956 GAGT - Member AKA: Mark Join Date: Jul 2012 Location: Bremen, GA Age: 64 Posts: 149 Vehicle: 2004 Grand Am SE	Most of those use a 9006 for a low beam and H1 for high.

11-11-2012, 12:13 PM	#25
xalteph - AKA: Xalteph Join Date: May 2012 Location: US Posts: 138 Vehicle: 2002 Grand Am GT 3400	Does anyone know how you would make that cutoff shield straight?