THought Id post up my current system - Page 4

caraudiodave · 08-26-2013, 06:03 PM

The tech flex arrived today. I now plan to use my extra custom 6 conductor wire to make my own RCA cables now. I will order some tech flex in another color for those.

Btw, if anyone plans to use tech flex, use a soldering iron or a hot knife to cut it. That will coterize the ends and prevent it from fraying.

caraudiodave · 08-27-2013, 05:57 PM

Ok got both sides of the speaker cable done.

Yes I know that they are not braided exactly the same, I did a better job this last piece. Doesn't matter, it will be hidden under carpet anyways.

I also ordered tech flex for my RCA that I am building and I also ordered some for the speaker level wires going to to the ms-8 which will also have speaker wire for a center channel (future expansion). Each of these two pieces of tech flex are different colors, not clear. Stay tuned for all of that wire construction.

I also got a piece of 12 conductor wire from parts express that has foil shielding and I got RCA connectors from them as well. I'm still debating if I want to use wire pants or heat shrink. I can't find 6 channel pants so I would have to use a 4 and a 2, or I can make it look clean with heat shrink. Price isnt too different.

bricooper78 · 08-27-2013, 07:08 PM

Pretty fancy looking wires

I'd just do the heat shrink, I've always had real good luck with it, I've never used pants tho, so I am biased a little I suppose

caraudiodave · 09-05-2013, 06:42 PM

Thanks bri. Yea I figured that as long as I'm going to do all of this wiring I might as well make it look nice.

So now on to the RCAs. Just a reminder, these will be 6 channels RCAs, so 6 plugs on each end. Since each plug gets a + and - that means 12 conductors. Also, the blue is a foil shielding. It only gets grounded at one end, so I removed it from the other end.
So the wire and tech flex came. I am now just waiting on the RCA ends.

I got the snake pattern because I wanted to be different. It should look nice once it's done.

bricooper78 · 09-05-2013, 06:45 PM

Yea man, I've never used top end wire, that is very sweet looking! Is the sleeve shielded then? Or is every individual wire?

SikMindz · 09-06-2013, 02:21 AM

Nice looking install as always Dave!

Random q: what does the tech flex do? Is it malleable and hold a shape e.g. if you bent it at a 90* angle would it maintain that bend?

Just curious because the company I work for now (doing product development) has one brand we're launching in high-end home theater and personal audio. We'd be competing against companies like beats, Sony, Speakercraft, etc. on the low-end but we're more of in the Klipsch, AT, Bose, B&O, B&W, etc. range in terms of pricing and quality. I'm still learning the nuances of this industry (I'm spread across 5 different brands so a lot to digest!) and it's an interesting material use.

At one point we were looking at getting into wheel manufacturing for a brand as well extending this new brand into car audio so just curious as to what tech flex does since I haven't come across it yet.

caraudiodave · 09-06-2013, 04:41 PM

Quote:

Originally Posted by bricooper78

Yea man, I've never used top end wire, that is very sweet looking! Is the sleeve shielded then? Or is every individual wire?

See below, the tech flex is not shielded. Each individual wire is shielded, that's the blue color on one end of the wiring. They coated the foil shielding so that easy one wouldn't short with the others.

Quote:

Originally Posted by SikMindz

Nice looking install as always Dave!

Random q: what does the tech flex do? Is it malleable and hold a shape e.g. if you bent it at a 90* angle would it maintain that bend?

Just curious because the company I work for now (doing product development) has one brand we're launching in high-end home theater and personal audio. We'd be competing against companies like beats, Sony, Speakercraft, etc. on the low-end but we're more of in the Klipsch, AT, Bose, B&O, B&W, etc. range in terms of pricing and quality. I'm still learning the nuances of this industry (I'm spread across 5 different brands so a lot to digest!) and it's an interesting material use.

At one point we were looking at getting into wheel manufacturing for a brand as well extending this new brand into car audio so just curious as to what tech flex does since I haven't come across it yet.

Tech flex is just a covering for the wire. It's an added layer of protection, kind of like split loom, but nicer. It does not hold shape unless you heat it (melt it). It is similar to what kimber kable uses on their expensive cables. This is my first project using it, but I have been very impressed with the quality and outcome.

I have been buying it through wirecare.com but they also sell it at parts-express.com.

caraudiodave · 09-09-2013, 04:18 PM

RCA cable update...I'm 1/2 way done with the plugs. I've had to revise my methods slightly but I'm learning as I go along...

I'm kind of proud of myself, these cables are 100x better than $200+ cables and I spent a fraction of that plus I get the pleasure of doing it myself. $40 on the plugs, $10 on the wire, $8 on the tech flex, and $5 on heat shrink.

bricooper78 · 09-09-2013, 05:51 PM

They look better than premade wires to boot dude!

xUnderCoverHoBo · 09-09-2013, 05:55 PM

Coop u're making the rounds on all the new posts i see. Everytime i hit refresh u posted on something else

bricooper78 · 09-09-2013, 05:59 PM

I'm messing with you

littering aaaaaaannnnnd

xUnderCoverHoBo · 09-09-2013, 07:43 PM

...and smoking the reefer.

Shade2012 · 09-09-2013, 08:08 PM

You guys just made my night.

xUnderCoverHoBo · 09-09-2013, 08:33 PM

License and registration chicken ****er. Lol

Shade2012 · 09-09-2013, 08:43 PM

I'm freakin out man..

caraudiodave · 09-17-2013, 04:13 PM

Thanks guys for the PHing. It makes me feel all warm and gooey inside.

Finished the RCAs. I got a bunch of extra plugs so if anyone wants custom RCAs send me a private message for pricing.

I'm preparing to do this install next week while my wife is in Budapest. I won't have her bugging me to spend time with her (after the kid is asleep) and I can drive her car to work.

bricooper78 · 09-17-2013, 04:16 PM

Excellent cable work man!!!

But, why is your wife going to Buda-ville???

caraudiodave · 09-17-2013, 04:49 PM

Work. There's an adult conference there (like adult con) but with the European Union. It's not what it seems, she's a media buyer for an adult entertainment company...so when you go to a porn site and you get those pop up ads, she put that there. Lol she gets to go to London, Amsterdam, Miami, Budapest...I wish I could make it this year, maybe next year.

bricooper78 · 09-17-2013, 05:37 PM

That is a complete pass for you anytime you're looking at newdz on the web... "oh no, I'm just uh, looking at your work......dear!"

I am so completely jealous right now

caraudiodave · 09-17-2013, 09:21 PM

Haha it's the opposite...she comes home from work sometimes and is like hey check out what I saw at work...and proceeds to show me disgusting videos (ones that make two girls one cup look like kindergartner work). She has made me hate adult content. Lol (search "giant vag!na eats banana") but of course don't misspell it.

But I do have fun visiting her at work. There's no naked people there, but lots of it on computer screens.

08-26-2013, 06:03 PM	#61
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	The tech flex arrived today. I now plan to use my extra custom 6 conductor wire to make my own RCA cables now. I will order some tech flex in another color for those. Btw, if anyone plans to use tech flex, use a soldering iron or a hot knife to cut it. That will coterize the ends and prevent it from fraying. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer) Last edited by caraudiodave; 08-26-2013 at 06:08 PM.

08-27-2013, 05:57 PM	#62
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Ok got both sides of the speaker cable done. Yes I know that they are not braided exactly the same, I did a better job this last piece. Doesn't matter, it will be hidden under carpet anyways. I also ordered tech flex for my RCA that I am building and I also ordered some for the speaker level wires going to to the ms-8 which will also have speaker wire for a center channel (future expansion). Each of these two pieces of tech flex are different colors, not clear. Stay tuned for all of that wire construction. I also got a piece of 12 conductor wire from parts express that has foil shielding and I got RCA connectors from them as well. I'm still debating if I want to use wire pants or heat shrink. I can't find 6 channel pants so I would have to use a 4 and a 2, or I can make it look clean with heat shrink. Price isnt too different. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

09-05-2013, 06:42 PM	#64
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Thanks bri. Yea I figured that as long as I'm going to do all of this wiring I might as well make it look nice. So now on to the RCAs. Just a reminder, these will be 6 channels RCAs, so 6 plugs on each end. Since each plug gets a + and - that means 12 conductors. Also, the blue is a foil shielding. It only gets grounded at one end, so I removed it from the other end. So the wire and tech flex came. I am now just waiting on the RCA ends. I got the snake pattern because I wanted to be different. It should look nice once it's done. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer) Last edited by caraudiodave; 09-05-2013 at 06:46 PM.

09-09-2013, 04:18 PM	#68
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	RCA cable update...I'm 1/2 way done with the plugs. I've had to revise my methods slightly but I'm learning as I go along... I'm kind of proud of myself, these cables are 100x better than $200+ cables and I spent a fraction of that plus I get the pleasure of doing it myself. $40 on the plugs, $10 on the wire, $8 on the tech flex, and $5 on heat shrink. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

09-09-2013, 05:55 PM	#70
xUnderCoverHoBo GAGT - Member AKA: Jarrett Join Date: Jan 2012 Location: Unknown Age: 28 Posts: 1,007 Vehicle: 2012 Honda Civic	Coop u're making the rounds on all the new posts i see. Everytime i hit refresh u posted on something else __________________ Poor college student mods...

08-27-2013, 07:08 PM	#63
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	Pretty fancy looking wires I'd just do the heat shrink, I've always had real good luck with it, I've never used pants tho, so I am biased a little I suppose

09-05-2013, 06:45 PM	#65
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	Yea man, I've never used top end wire, that is very sweet looking! Is the sleeve shielded then? Or is every individual wire?

09-09-2013, 05:51 PM	#69
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	They look better than premade wires to boot dude!

09-09-2013, 05:59 PM	#71
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	I'm messing with you littering aaaaaaannnnnd

09-09-2013, 07:43 PM	#72
xUnderCoverHoBo GAGT - Member AKA: Jarrett Join Date: Jan 2012 Location: Unknown Age: 28 Posts: 1,007 Vehicle: 2012 Honda Civic	...and smoking the reefer. __________________ Poor college student mods...

09-09-2013, 08:08 PM	#73
Shade2012 GAGT - Senior Member AKA: Logan Join Date: Jul 2010 Location: Carlinville, Illinois Posts: 1,176 Vehicle: 2000 Grand Am GT Coupe	You guys just made my night.

09-09-2013, 08:33 PM	#74
xUnderCoverHoBo GAGT - Member AKA: Jarrett Join Date: Jan 2012 Location: Unknown Age: 28 Posts: 1,007 Vehicle: 2012 Honda Civic	License and registration chicken ****er. Lol __________________ Poor college student mods...

09-09-2013, 08:43 PM	#75
Shade2012 GAGT - Senior Member AKA: Logan Join Date: Jul 2010 Location: Carlinville, Illinois Posts: 1,176 Vehicle: 2000 Grand Am GT Coupe	I'm freakin out man..

09-17-2013, 04:13 PM	#76
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Thanks guys for the PHing. It makes me feel all warm and gooey inside. Finished the RCAs. I got a bunch of extra plugs so if anyone wants custom RCAs send me a private message for pricing. I'm preparing to do this install next week while my wife is in Budapest. I won't have her bugging me to spend time with her (after the kid is asleep) and I can drive her car to work. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

09-17-2013, 04:16 PM	#77
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	Excellent cable work man!!! But, why is your wife going to Buda-ville???

09-17-2013, 04:49 PM	#78
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Work. There's an adult conference there (like adult con) but with the European Union. It's not what it seems, she's a media buyer for an adult entertainment company...so when you go to a porn site and you get those pop up ads, she put that there. Lol she gets to go to London, Amsterdam, Miami, Budapest...I wish I could make it this year, maybe next year. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

09-17-2013, 05:37 PM	#79
bricooper78 Dammit Sleepy AKA: Cooper Join Date: Nov 2007 Location: IA Posts: 4,078 Vehicle: 03 Sierra Z71	That is a complete pass for you anytime you're looking at newdz on the web... "oh no, I'm just uh, looking at your work......dear!" I am so completely jealous right now

09-17-2013, 09:21 PM	#80
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Haha it's the opposite...she comes home from work sometimes and is like hey check out what I saw at work...and proceeds to show me disgusting videos (ones that make two girls one cup look like kindergartner work). She has made me hate adult content. Lol (search "giant vag!na eats banana") but of course don't misspell it. But I do have fun visiting her at work. There's no naked people there, but lots of it on computer screens. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)