New performance parts?

MilzyZ34 · 01-11-2018, 02:04 PM

So I'm not sure if anyone has noticed, but we've developed quite a few new parts in 2017, especially with that crazy 3900 6-speed project we wrapped up, and I was thinking about continuing the trend to design and develop more parts for 2018 as well.

Here's a few of the parts we developed lately:

-Stage 2 and 3 CNC'd heads for LX9 3500 engines
-Stage 2 and 3 CNC'd heads for LZ4 3500 engines
-Stage 2 and 3 CNC'd heads for LZ9 3900 engines
-Stage 2 and 3 CNC'd heads for 3800 SC and non-SC engines
-billet stroker crankshaft kit for a LZ9 3900 to increase displacement to 4.2L
-injector kits for LZ4 and LZ9 engines
-cam profiles for LZ4 and LZ9 engines - still need to make a group buy to get custom blanks made.
-ported intake manifolds for LZ4 and LZ9 engines
-billet flywheel/Spec clutch non-dual-mass clutch setup for F40 transmissions for use with 60 degree engines
-3800 turbo kits and turbo headers
-W-body tubular rear cradles
-tubular lateral arms and trailing arms for W-body vehicles
-tubular lateral arm and trailing arms for N-body vehicles
-Standard performance packages for 3100, 3400, 3500, 3800, 3800 supercharged engines

We also designed and produced a twin turbo kit for the 3900 in an N-body, and although we did not copy the design, we are able to make it again if needed. Same goes for the custom wiring harness, engine mounts, AC Delete, or any of the other parts we made for that big project.

We've even started developing a line of parts for a new platform.

These are some other ideas I'm considering for 2018 ...
-tubular rear cradles for N-body vehicles
-sway bars for various vehicles
-strut tower braces
-camber adjustment plates
-and a couple more I want to leave a surprise

So I was just wondering if any of you guys had some other ideas for products you might want, and if there is enough interest, maybe we could get them made.

01OhioAlero · 01-12-2018, 12:37 AM

If you could get sway bars comparable to the PFYC ones that were made, Im sure a handful of people including myself would be interested in them.

00redse · 01-12-2018, 11:42 AM

Quote:

Originally Posted by 01OhioAlero

If you could get sway bars comparable to the PFYC ones that were made, Im sure a handful of people including myself would be interested in them.

+1

I'd take a set of sway bars for my Grand Am similar to the speedbuilt set I have on my Alero.

3400cavyhatch · 01-13-2018, 07:09 PM

I would be interested in the away bars too

gregraisbeck · 01-31-2018, 07:02 AM

Sway Bars would be great to have available again

MikeMc · 02-24-2018, 10:51 PM

I’m lookin for a set of sway bars for my 2000 grand am GT. I’m in for a set if there’s a group buy.

CJaguar265 · 06-22-2018, 12:12 PM

I'm down for a set of sway bars

CJaguar265 · 06-22-2018, 12:13 PM

I ordered a rear subframe from milzy motorsports and patiently waiting for it

CJaguar265 · 08-13-2018, 10:21 PM

Hi can Mike please contact me ?

MilzyZ34 · 08-21-2018, 12:49 PM

group buys launched ...

http://www.grandamgt.com/forum/showt...38#post1267038

Cjag, PM sent

01-11-2018, 02:04 PM	#1
MilzyZ34 Fastest FWD GA AKA: Mike Join Date: Aug 2003 Location: Dayton, OH Age: 38 Posts: 942 Vehicle: 1999 Grand Am GT	New performance parts? So I'm not sure if anyone has noticed, but we've developed quite a few new parts in 2017, especially with that crazy 3900 6-speed project we wrapped up, and I was thinking about continuing the trend to design and develop more parts for 2018 as well. Here's a few of the parts we developed lately: -Stage 2 and 3 CNC'd heads for LX9 3500 engines -Stage 2 and 3 CNC'd heads for LZ4 3500 engines -Stage 2 and 3 CNC'd heads for LZ9 3900 engines -Stage 2 and 3 CNC'd heads for 3800 SC and non-SC engines -billet stroker crankshaft kit for a LZ9 3900 to increase displacement to 4.2L -injector kits for LZ4 and LZ9 engines -cam profiles for LZ4 and LZ9 engines - still need to make a group buy to get custom blanks made. -ported intake manifolds for LZ4 and LZ9 engines -billet flywheel/Spec clutch non-dual-mass clutch setup for F40 transmissions for use with 60 degree engines -3800 turbo kits and turbo headers -W-body tubular rear cradles -tubular lateral arms and trailing arms for W-body vehicles -tubular lateral arm and trailing arms for N-body vehicles -Standard performance packages for 3100, 3400, 3500, 3800, 3800 supercharged engines We also designed and produced a twin turbo kit for the 3900 in an N-body, and although we did not copy the design, we are able to make it again if needed. Same goes for the custom wiring harness, engine mounts, AC Delete, or any of the other parts we made for that big project. We've even started developing a line of parts for a new platform. These are some other ideas I'm considering for 2018 ... -tubular rear cradles for N-body vehicles -sway bars for various vehicles -strut tower braces -camber adjustment plates -and a couple more I want to leave a surprise So I was just wondering if any of you guys had some other ideas for products you might want, and if there is enough interest, maybe we could get them made. __________________ 1999 Z34 - Was a Stage 3 3800 Supercharged, but not fast enough so I have some new plans for her. 1999 Grand Am GT Race Car - 12.1 sec ET, STOCK motor, 10 psi http://www.milzymotorsports.com

01-13-2018, 07:09 PM	#4
3400cavyhatch GAGT - Member AKA: Scott Join Date: Sep 2003 Location: Onatrio, Canada Posts: 70 Vehicle: 84 Cavalier Type 10	I would be interested in the away bars too __________________ 1993 Chevy C1500 3100v6 turbo 2004 Alero 3400 bone stock with a cheap muffler 15.32 @ 88.69 99 Alero 3500 swap running(from 2.4). ported and polished heads. totaled by a honda 2002 GAGT 3500 swap

01-31-2018, 07:02 AM	#5
gregraisbeck GAGT - Member AKA: Greg Join Date: Oct 2006 Location: O'fallon, MO. Posts: 165 Vehicle: '05 SC/T	Sway Bars would be great to have available again __________________ 3400 Built from the ground up including a m62 Supercharger kit and full custom exhaust. Getrag F23 swap is next once tuning is complete and it's too cold out to go outside. Custom FBSS Air Suspension built and installed.

02-24-2018, 10:51 PM	#6
MikeMc GAGT - Newbie AKA: Wil Join Date: Jan 2016 Location: Phoenix, AZ Posts: 3 Vehicle: 2000 Grand Am GT Sedan	Speedbuilt sway bars I’m lookin for a set of sway bars for my 2000 grand am GT. I’m in for a set if there’s a group buy.

08-21-2018, 12:49 PM	#10
MilzyZ34 Fastest FWD GA AKA: Mike Join Date: Aug 2003 Location: Dayton, OH Age: 38 Posts: 942 Vehicle: 1999 Grand Am GT	group buys launched ... http://www.grandamgt.com/forum/showt...38#post1267038 Cjag, PM sent __________________ 1999 Z34 - Was a Stage 3 3800 Supercharged, but not fast enough so I have some new plans for her. 1999 Grand Am GT Race Car - 12.1 sec ET, STOCK motor, 10 psi http://www.milzymotorsports.com

01-12-2018, 12:37 AM	#2
01OhioAlero GAGT - Newbie AKA: Tyler Join Date: Jun 2014 Location: Ohio Posts: 13 Vehicle: 2001 Alero	If you could get sway bars comparable to the PFYC ones that were made, Im sure a handful of people including myself would be interested in them.

06-22-2018, 12:12 PM	#7
CJaguar265 GAGT - Newbie AKA: Cjaguar265 Join Date: Oct 2015 Location: Revere, Mass Posts: 15 Vehicle: 2003 Grand Am GT	I'm down for a set of sway bars

06-22-2018, 12:13 PM	#8
CJaguar265 GAGT - Newbie AKA: Cjaguar265 Join Date: Oct 2015 Location: Revere, Mass Posts: 15 Vehicle: 2003 Grand Am GT	I ordered a rear subframe from milzy motorsports and patiently waiting for it

08-13-2018, 10:21 PM	#9
CJaguar265 GAGT - Newbie AKA: Cjaguar265 Join Date: Oct 2015 Location: Revere, Mass Posts: 15 Vehicle: 2003 Grand Am GT	Hi can Mike please contact me ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode