B&M shift plus

HardD99 · 09-30-2002, 10:35 AM

hey guys, i have been hearing about this shifting module thing that firms up our shifts, and someone finally posted a part #, i dont know if it's correct but when i click on applications it shows grand ams but it says 1994 - 1997, but will it still work on our 99+'s?? please me know guys, i wanted to order this mod asap

http://store.summitracing.com/partdetail.asp?part=15887

thankx in advance

zoran316 · 09-30-2002, 10:52 AM

ok here is the right # for the 3.4L

BMM-70380
or just try
70380

HardD99 · 09-30-2002, 11:42 AM

THANK YOU! i ordered the other one and just had to call summit and have them change it, very good customer service might i add... i got it 2 day air, so they said i should have it on wednesday! woohoo! i cant wait!

how hard is this thing to install anyways?

zoran316 · 09-30-2002, 01:11 PM

no problem,

it's a real snap, all u have to do is get to the ecu wiring, tap into 2 small wires and u're set, like a 5 minute install

i never ran mine on FIRMEST tho i find FIRM to be firm enough hehe

oh yeah summit CS is amazing, 20 minutes after i placed the order one sales rep called me to confirm my shipping charges (since im in canada) before they shipped it.

HardD99 · 10-02-2002, 03:57 PM

well i got it... how do i install this thing? i dont find the instructions to be to helpfull.. i dont see instructions for our cars anywhere, can somone who has this installed give me some detail instuctions on how to install it? thankx alot

Dr_Kyle · 10-02-2002, 06:29 PM

yeah a pic or two of the install would be nice. Mine is on the way too

zoran316 · 10-02-2002, 10:06 PM

hey kyle, got ur PM, I'll send u the tracking # in the morning left it at the office

u might get it by tomorrow anyway hehe

I'll get a digi pic for ya guys and point out which 2 wires there are to tap into

Dr_Kyle · 10-02-2002, 10:41 PM

...I get the package, THEN the #

That's cool. Yeah a pic would be nice too. Thanks again btw

HardD99 · 10-03-2002, 04:29 AM

sweet! thankx zoran, i cant wait to get this thing installed

black99gt · 10-03-2002, 04:47 AM

Here ya guys go.

A pick of the install PLACE at least. Follow the directions for the wire colors.

BE EXTRA CAREFUL AND MAKE SURE YOU GET THE RiTE WIRE THE FIRST TIME! Or its a pain in the butt to get it the 2nd time.

Take your time with the install, there are ALLLLLOOOTTT of wires there and most of them look the same hehe.

UNCTYPE-S · 10-03-2002, 08:41 AM

does anyone have instructions they can post up. and another thing, i was a little too leary on this product since its not made for our cars. has anyone had any problems or anything to look out for. any bad/good info would be ok, cause i dont wanna buy it if it messes our cars up for sure.

black99gt · 10-03-2002, 09:03 AM

Ive used it for about 20 thousand miles now on and off.. Not a problem yet.

They include instructions. Just look at my pic, and find the 2 color wire taps in the instructions, and thats it.

HardD99 · 10-03-2002, 02:12 PM

alright i was reading directions and it says:

A. Locate the RED WITH BLACK STRIPE wire and crimp it to the RED wire from the SHIFTPLUS+ using the supplied Scotchloc connector.

B. Locate the LIGHT BLUE WITH WHITE STRIPE wire and crim it to the BLACK wire from the SHIFTPLUS+ using the supplied Scotchloc connector

HardD99 · 10-03-2002, 02:14 PM

by the way guys, i thought i read somewhere that this thing makes the tires chirp into 2nd gear, is that true?

HardD99 · 10-03-2002, 05:56 PM

well i went out and tried to install it, but i see 2 red wires with black stripes :-\ i connected to one, i hope it was the right one... i get my new alternator tomorrow so i will try it out tomorrow... i hope it was worth the money...

zoran316 · 10-03-2002, 09:19 PM

yup, it chirps in 2nd gear...well at least my kit did heh

if u power brake (u have to be in 2nd in the shifter, brake, gas till 2 k rpm or so and then smash the gas as soon as u let go of the brake) and u should hear a nice chirp...

UNCTYPE-S · 10-03-2002, 10:21 PM

well, i am no longer interested in this product.

for one i had bad feelings from the start.
secondly, its not made for our cars, and thats an obvious negative
and lastly, i have heard more bad things then good about this.

my mind has totally changed for the opposite. for all yuo people that have b&m shift improvers, all i can say is hope the best for ya. i dont wanna risk my tranny goin down.

Blackrider · 10-03-2002, 10:53 PM

Hey i was wondering why you dident go with the transintercepter unline B&M it is desined for the good old 45

UNCTYPE-S · 10-03-2002, 10:56 PM

Quote:

Originally posted by Blackrider
Hey i was wondering why you dident go with the transintercepter unline B&M it is desined for the good old 45

whats the difference between the 2?

UNCTYPE-S · 10-03-2002, 10:59 PM

ok, i saw it on pfyc.com just now. so its almost the same thing pretty much? just the fact that its more expensive. do you have this on your car?

09-30-2002, 10:35 AM	#1
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	B&M shift plus hey guys, i have been hearing about this shifting module thing that firms up our shifts, and someone finally posted a part #, i dont know if it's correct but when i click on applications it shows grand ams but it says 1994 - 1997, but will it still work on our 99+'s?? please me know guys, i wanted to order this mod asap http://store.summitracing.com/partdetail.asp?part=15887 thankx in advance __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

09-30-2002, 10:52 AM	#2
zoran316 GAGT - Member Join Date: Aug 2002 Location: Toronto, ON Age: 39 Posts: 85	ok here is the right # for the 3.4L BMM-70380 or just try 70380 __________________ 1999 Grand AM GT - 3.4L V6 Black 4 Door Tinted/Blacked Out. Lots of mods, lots more to come. Visit http://www.n-body.net/registry/zoran316/

09-30-2002, 11:42 AM	#3
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	THANK YOU! i ordered the other one and just had to call summit and have them change it, very good customer service might i add... i got it 2 day air, so they said i should have it on wednesday! woohoo! i cant wait! how hard is this thing to install anyways? __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

09-30-2002, 01:11 PM	#4
zoran316 GAGT - Member Join Date: Aug 2002 Location: Toronto, ON Age: 39 Posts: 85	no problem, it's a real snap, all u have to do is get to the ecu wiring, tap into 2 small wires and u're set, like a 5 minute install i never ran mine on FIRMEST tho i find FIRM to be firm enough hehe oh yeah summit CS is amazing, 20 minutes after i placed the order one sales rep called me to confirm my shipping charges (since im in canada) before they shipped it. __________________ 1999 Grand AM GT - 3.4L V6 Black 4 Door Tinted/Blacked Out. Lots of mods, lots more to come. Visit http://www.n-body.net/registry/zoran316/

10-02-2002, 03:57 PM	#5
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	well i got it... how do i install this thing? i dont find the instructions to be to helpfull.. i dont see instructions for our cars anywhere, can somone who has this installed give me some detail instuctions on how to install it? thankx alot __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

10-02-2002, 06:29 PM	#6
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	yeah a pic or two of the install would be nice. Mine is on the way too __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

10-02-2002, 10:06 PM	#7
zoran316 GAGT - Member Join Date: Aug 2002 Location: Toronto, ON Age: 39 Posts: 85	hey kyle, got ur PM, I'll send u the tracking # in the morning left it at the office u might get it by tomorrow anyway hehe I'll get a digi pic for ya guys and point out which 2 wires there are to tap into __________________ 1999 Grand AM GT - 3.4L V6 Black 4 Door Tinted/Blacked Out. Lots of mods, lots more to come. Visit http://www.n-body.net/registry/zoran316/

10-02-2002, 10:41 PM	#8
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	...I get the package, THEN the # That's cool. Yeah a pic would be nice too. Thanks again btw __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

10-03-2002, 04:29 AM	#9
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	sweet! thankx zoran, i cant wait to get this thing installed __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

10-03-2002, 04:47 AM	#10
black99gt 11sec 4cycl club Join Date: Aug 2002 Location: Cleveland and Columbus Ohio Age: 38 Posts: 385 Vehicle: 95 AWD Turbo Talon	Here ya guys go. A pick of the install PLACE at least. Follow the directions for the wire colors. BE EXTRA CAREFUL AND MAKE SURE YOU GET THE RiTE WIRE THE FIRST TIME! Or its a pain in the butt to get it the 2nd time. Take your time with the install, there are ALLLLLOOOTTT of wires there and most of them look the same hehe. Attached Thumbnails __________________ Red 1995 Eagle Talon AWD Turbo "1G INA 2G" <-- 6bolt motor "anti-crankwalk" FP 3055 turbo, S-AFC, Tial BOV, GM MAFT, Defi boost gauge, TRE egt probe setup, Hallman MBC, 255lph pump, AFPR, 650cc’s, ACT 2600, Dejon Race FMIC, ECU "hacks", Stutterbox, B&M short shifter, K&N filter, shifter bushings, brass tranny shifter busings, Upper strut brace. Mods for 11sec passes…

10-03-2002, 08:41 AM	#11
UNCTYPE-S GAGT - Junkie AKA: Jim Join Date: Aug 2002 Location: CHICAGO Posts: 5,517 Vehicle: 09 G37x Coupe	does anyone have instructions they can post up. and another thing, i was a little too leary on this product since its not made for our cars. has anyone had any problems or anything to look out for. any bad/good info would be ok, cause i dont wanna buy it if it messes our cars up for sure.

10-03-2002, 09:03 AM	#12
black99gt 11sec 4cycl club Join Date: Aug 2002 Location: Cleveland and Columbus Ohio Age: 38 Posts: 385 Vehicle: 95 AWD Turbo Talon	Ive used it for about 20 thousand miles now on and off.. Not a problem yet. They include instructions. Just look at my pic, and find the 2 color wire taps in the instructions, and thats it. __________________ Red 1995 Eagle Talon AWD Turbo "1G INA 2G" <-- 6bolt motor "anti-crankwalk" FP 3055 turbo, S-AFC, Tial BOV, GM MAFT, Defi boost gauge, TRE egt probe setup, Hallman MBC, 255lph pump, AFPR, 650cc’s, ACT 2600, Dejon Race FMIC, ECU "hacks", Stutterbox, B&M short shifter, K&N filter, shifter bushings, brass tranny shifter busings, Upper strut brace. Mods for 11sec passes…

10-03-2002, 02:12 PM	#13
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	alright i was reading directions and it says: A. Locate the RED WITH BLACK STRIPE wire and crimp it to the RED wire from the SHIFTPLUS+ using the supplied Scotchloc connector. B. Locate the LIGHT BLUE WITH WHITE STRIPE wire and crim it to the BLACK wire from the SHIFTPLUS+ using the supplied Scotchloc connector __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

10-03-2002, 02:14 PM	#14
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	by the way guys, i thought i read somewhere that this thing makes the tires chirp into 2nd gear, is that true? __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

10-03-2002, 05:56 PM	#15
HardD99 I now own a Chrysler Join Date: Aug 2002 Location: Seattle, WA Age: 38 Posts: 135 Vehicle: 1998 Concorde LXi	well i went out and tried to install it, but i see 2 red wires with black stripes :-\ i connected to one, i hope it was the right one... i get my new alternator tomorrow so i will try it out tomorrow... i hope it was worth the money... __________________ 99' GA SE 4DR http://www.n-body.net/registry/99gase/

10-03-2002, 09:19 PM	#16
zoran316 GAGT - Member Join Date: Aug 2002 Location: Toronto, ON Age: 39 Posts: 85	yup, it chirps in 2nd gear...well at least my kit did heh if u power brake (u have to be in 2nd in the shifter, brake, gas till 2 k rpm or so and then smash the gas as soon as u let go of the brake) and u should hear a nice chirp... __________________ 1999 Grand AM GT - 3.4L V6 Black 4 Door Tinted/Blacked Out. Lots of mods, lots more to come. Visit http://www.n-body.net/registry/zoran316/

10-03-2002, 10:21 PM	#17
UNCTYPE-S GAGT - Junkie AKA: Jim Join Date: Aug 2002 Location: CHICAGO Posts: 5,517 Vehicle: 09 G37x Coupe	well, i am no longer interested in this product. for one i had bad feelings from the start. secondly, its not made for our cars, and thats an obvious negative and lastly, i have heard more bad things then good about this. my mind has totally changed for the opposite. for all yuo people that have b&m shift improvers, all i can say is hope the best for ya. i dont wanna risk my tranny goin down.

10-03-2002, 10:53 PM	#18
Blackrider Ifeast Upon The Weak AKA: Jordie Join Date: Aug 2002 Location: Victoria B.C. Age: 36 Posts: 3,048 Vehicle: 06 GTP 6Speed	Hey i was wondering why you dident go with the transintercepter unline B&M it is desined for the good old 45 __________________ 60DegreeGTP

10-03-2002, 10:59 PM	#20
UNCTYPE-S GAGT - Junkie AKA: Jim Join Date: Aug 2002 Location: CHICAGO Posts: 5,517 Vehicle: 09 G37x Coupe	ok, i saw it on pfyc.com just now. so its almost the same thing pretty much? just the fact that its more expensive. do you have this on your car?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode