Got NOS, now what?

Dr_Kyle · 11-17-2002, 12:27 AM

Okay, I just bought a nitrous kit (setup for 75 shot) from Richie (AleroME) and I have it sitting next to me in my room. What I want to know is if there's anything I should do to prepare for it. I am getting the NGK TR6's like everybody says so that won't be an issue.

My car has about 50k on it though. I have never changed the plugs, wires, fuel filter, fuel injectors, etc... Should I change any of these BEFORE the install?

Also, can anybody point me to a page with good installation instructions and pics?

Watch4MyBu · 11-17-2002, 09:25 AM

I would look into a remote bottle opener and a bottle warmer

Dr_Kyle · 11-18-2002, 11:59 PM

both of those are on the list for the future...

Does anybody happen to have maybe a pic or two of the install, or maybe a diagram. I doubt installation will be hard, but it didn't come with instructions so I'm just looking for anything to guide me through it. I think somebody (pretty sure it was NeonGA) posted a brief rundown on the old boards. That was for the ZEX system though.

iceman · 11-19-2002, 12:04 AM

Who makes the kit??

Worked a very small bit with gtguy's NOS kit. Adam Thomas has a good shot of his TB with a good spot to stick the microswitch (at least I think it was him). Other than that it's pretty simple.

Sexysteve · 11-19-2002, 04:51 AM

any ?'s u need ask. i can answer most of your ?'s

Dr_Kyle · 11-20-2002, 09:22 AM

sweet, thanks for the offer steve. I think I'm gonna install it this weekend, but that plan could easily change. I will keep you guys posted.

iceman, it is a NOS kit

GTPguy99 · 11-20-2002, 06:55 PM

hey Kyle let me know if you need any help if you want pm me and i will give you my cell # and you can call me if you run into any problems. Also I have heard to stay away from remote openers because they have a tendancy to stick open

just let me know what ya need and i will dig it up for ya

Dr_Kyle · 11-20-2002, 08:13 PM

well actually... I do have couple of questions for anybody who want to answer. Mostly what I would like is a pic or two.

Actually, scratch that, I'm gonna snap some pics of the kit and label each thing and post em up and maybe somebody would be nice enough to answer the blanks in my head...

ANY help is greatly appreciated!

pics in a minute...

GTPguy99 · 11-20-2002, 08:19 PM

ok im waiting ill help ya out

also i am going to email you a pic that detroitGagt sent me with a collage of pics

edit whats your email addy?? also hop on aim i can help ya with some stuff

Dr_Kyle · 11-20-2002, 08:42 PM

ok, my AIM is "*****"
email is *****

and here's the first pic..

Dr_Kyle · 11-20-2002, 08:43 PM

and pic 2....
what are all these parts?? hehe

Dr_Kyle · 11-20-2002, 08:44 PM

pic of the switches...

Dr_Kyle · 11-20-2002, 08:47 PM

and finally a pic of the solenoid (sp?) cluster deal...

iceman · 11-20-2002, 09:05 PM

ok so what is your question?? heh

GTPguy99 · 11-20-2002, 10:01 PM

I already helped him on AIM

You

j/p

Dr_Kyle · 11-20-2002, 11:54 PM

Thanks again man, I can't believe you managed to explain that mess of parts to me! I will keep everybody here posted on how the install goes, which will probably be this weekend (although I want to go put it in right now!)

AleroME · 11-21-2002, 12:59 AM

my good ole nitrous system! ... hope ya enjoy it kyle!

Dr_Kyle · 11-21-2002, 02:12 AM

oh I know I will! I didn't know that you had made/adjusted that bracket that you included in the kit. Thank you for that!

sep2000 · 11-21-2002, 10:57 AM

Is any one here familiar with botlfeds setup? I purchased his and have some questions but he doesnt seem to want to answer any of my pms. I was hoping some one on here could?? It is similar to dr kyles setup except mine came with the airbox lid with the nos lines running into it. Just have a few questions if anyone could help let me know, or if there is anyone in the central texas area who could help me with the install holler at me. Thanks

AleroME · 11-21-2002, 01:26 PM

Quote:

Originally posted by Dr_Kyle
oh I know I will! I didn't know that you had made/adjusted that bracket that you included in the kit. Thank you for that!

You mean the wooden board stand with blue vinyl cover... hehe it was fully covered in blue vinyl.. but then i bought some white vinyl dye and i had to try it out before i used it on my car.. so i had use the bottom of the stand if ya wondering where it went. hehehehehe

I'd figure to ship it without the stand.. but then i said what am i going to do with it? So i just lefted it in.

11-17-2002, 12:27 AM	#1
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	Got NOS, now what? Okay, I just bought a nitrous kit (setup for 75 shot) from Richie (AleroME) and I have it sitting next to me in my room. What I want to know is if there's anything I should do to prepare for it. I am getting the NGK TR6's like everybody says so that won't be an issue. My car has about 50k on it though. I have never changed the plugs, wires, fuel filter, fuel injectors, etc... Should I change any of these BEFORE the install? Also, can anybody point me to a page with good installation instructions and pics? __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-18-2002, 11:59 PM	#3
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	both of those are on the list for the future... Does anybody happen to have maybe a pic or two of the install, or maybe a diagram. I doubt installation will be hard, but it didn't come with instructions so I'm just looking for anything to guide me through it. I think somebody (pretty sure it was NeonGA) posted a brief rundown on the old boards. That was for the ZEX system though. __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-19-2002, 12:04 AM	#4
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	Who makes the kit?? Worked a very small bit with gtguy's NOS kit. Adam Thomas has a good shot of his TB with a good spot to stick the microswitch (at least I think it was him). Other than that it's pretty simple. __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

11-20-2002, 09:22 AM	#6
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	sweet, thanks for the offer steve. I think I'm gonna install it this weekend, but that plan could easily change. I will keep you guys posted. iceman, it is a NOS kit __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page Last edited by Dr_Kyle; 11-20-2002 at 09:27 AM.

11-20-2002, 06:55 PM	#7
GTPguy99 New Tranny FTW!!!!! AKA: Chris Join Date: Aug 2002 Location: Philly, Pa Age: 41 Posts: 440 Vehicle: 99 GTP	hey Kyle let me know if you need any help if you want pm me and i will give you my cell # and you can call me if you run into any problems. Also I have heard to stay away from remote openers because they have a tendancy to stick open just let me know what ya need and i will dig it up for ya __________________ Chris 99 "Freak" GTP-Mods:3.4Pulley,3 inch Downpipe, DHP, 180 T-Stat and CAI. 1/4 Mile 13.47 @ 102MPH

11-17-2002, 09:25 AM	#2
Watch4MyBu Lost Malibu Owner Join Date: Aug 2002 Location: New Jersey Age: 42 Posts: 493 Vehicle: 1998 Chevy Malibu	I would look into a remote bottle opener and a bottle warmer

11-19-2002, 04:51 AM	#5
Sexysteve AutoBody Man/ASE AKA: STEVE Join Date: Aug 2002 Location: Waterford, Mi Age: 40 Posts: 211 Vehicle: Juiced 2000 GAGT	any ?'s u need ask. i can answer most of your ?'s

11-20-2002, 08:13 PM	#8
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	well actually... I do have couple of questions for anybody who want to answer. Mostly what I would like is a pic or two. Actually, scratch that, I'm gonna snap some pics of the kit and label each thing and post em up and maybe somebody would be nice enough to answer the blanks in my head... ANY help is greatly appreciated! pics in a minute... __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-20-2002, 08:19 PM	#9
GTPguy99 New Tranny FTW!!!!! AKA: Chris Join Date: Aug 2002 Location: Philly, Pa Age: 41 Posts: 440 Vehicle: 99 GTP	ok im waiting ill help ya out also i am going to email you a pic that detroitGagt sent me with a collage of pics edit whats your email addy?? also hop on aim i can help ya with some stuff __________________ Chris 99 "Freak" GTP-Mods:3.4Pulley,3 inch Downpipe, DHP, 180 T-Stat and CAI. 1/4 Mile 13.47 @ 102MPH Last edited by GTPguy99; 11-20-2002 at 08:22 PM.

11-20-2002, 08:42 PM	#10
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	ok, my AIM is "***" email is *** and here's the first pic.. Attached Thumbnails __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page Last edited by Dr_Kyle; 12-21-2002 at 02:02 PM.

11-20-2002, 08:43 PM	#11
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	and pic 2.... what are all these parts?? hehe Attached Thumbnails __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-20-2002, 08:44 PM	#12
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	pic of the switches... Attached Thumbnails __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-20-2002, 08:47 PM	#13
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	and finally a pic of the solenoid (sp?) cluster deal... Attached Thumbnails __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-20-2002, 09:05 PM	#14
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	ok so what is your question?? heh __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

11-20-2002, 10:01 PM	#15
GTPguy99 New Tranny FTW!!!!! AKA: Chris Join Date: Aug 2002 Location: Philly, Pa Age: 41 Posts: 440 Vehicle: 99 GTP	I already helped him on AIM You j/p __________________ Chris 99 "Freak" GTP-Mods:3.4Pulley,3 inch Downpipe, DHP, 180 T-Stat and CAI. 1/4 Mile 13.47 @ 102MPH

11-20-2002, 11:54 PM	#16
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	Thanks again man, I can't believe you managed to explain that mess of parts to me! I will keep everybody here posted on how the install goes, which will probably be this weekend (although I want to go put it in right now!) __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-21-2002, 12:59 AM	#17
AleroME Werd AKA: Richie Join Date: Aug 2002 Location: Plano, Tx (dallas) Age: 38 Posts: 676 Vehicle: 2000 Alero GLS	my good ole nitrous system! ... hope ya enjoy it kyle! __________________ Richie www.myspace.com/aftermathd.i.ck (remove dots, due to the language filter on the site)

11-21-2002, 02:12 AM	#18
Dr_Kyle Better Than Ever AKA: Doctor Join Date: Aug 2002 Location: Orlando, FL Age: 40 Posts: 2,116 Vehicle: 2000 Grand Am GT1	oh I know I will! I didn't know that you had made/adjusted that bracket that you included in the kit. Thank you for that! __________________ Looking for Performance Parts? Click Here to check out Doctor Speed! Best ET: 14.664 @ 94.82 MPH Doctor Speed - Grand Am Performance Parts My Cardomain Page

11-21-2002, 10:57 AM	#19
sep2000 GAGT - Member AKA: Eric Join Date: Oct 2002 Location: Killeen Texas Age: 44 Posts: 52 Vehicle: 2000 GAGT	I got a nos kit too.. Is any one here familiar with botlfeds setup? I purchased his and have some questions but he doesnt seem to want to answer any of my pms. I was hoping some one on here could?? It is similar to dr kyles setup except mine came with the airbox lid with the nos lines running into it. Just have a few questions if anyone could help let me know, or if there is anyone in the central texas area who could help me with the install holler at me. Thanks Last edited by sep2000; 11-21-2002 at 11:01 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode