Andys fender install finally done

caraudiodave · 04-08-2006, 01:40 PM

ok so after 4 weeks (ive been really busy) i finally finished my fender install this morning. here they are all done:

i actualy like how the rockers overlap the bottom vent...it looks way better than i expected. lets hear it everyone...i wanna hear good and bad comments.

Hodge · 04-08-2006, 01:41 PM

lets see some farther away shots.. i like them though!

blake · 04-08-2006, 01:42 PM

dont like how the rockers overlap myself, but they do look nice

DrFabulous · 04-08-2006, 01:42 PM

Personally..... I'd be pissed when I found out the fenders get covered by stock body parts. Seems like a bone-headed move by AAS.

El_Diablo · 04-08-2006, 01:46 PM

no, the fenders were designed to work with their skirts and other aftermerkat skirts

personally i hate the ribs, and if i had a GA, they would be the first thing to go

DrFabulous · 04-08-2006, 01:49 PM

Quote:

Originally Posted by El_Diablo

no, the fenders were designed to work with their skirts and other aftermerkat skirts

personally i hate the ribs, and if i had a GA, they would be the first thing to go

Why would they sell them individually then.... that's BS. That's like saying.... ok, their hood sticks out the front too far, but that's because it's supposed to match perfectly with their front bumper they offer.

Even if they were higher up, I don't like them much. Sorry.

caraudiodave · 04-08-2006, 01:50 PM

i knew about the overlap when i got the fenders. i didnt care.

as far as far away shots....thats kinda funny. since the car has been sitting for 4 weeks my new optima redtop is dead. i now have the rest of the day to find a way of getting it started (jump it off my other car) and figure out if my alternator is dead too. this morning i jumped it and let it run for 1/2 hour. when i went to shut off the engine the voltage had dropped to 13 volts. now its at < 8 volts.

ill get pics as soon as i figure out the issue and wash the car.

notsoaveragej0e · 04-08-2006, 02:07 PM

I don't think the over lap looks that terrible, I think most of us notice it because we are looking for it. The average person will not notice something like that, i dont think. Are you going to do any lighting or anything behind it like another member on here did (I think GlisteningWhite)?

Ajaxus · 04-08-2006, 02:09 PM

i still dont like how the skirts overlap it.

caraudiodave · 04-08-2006, 02:54 PM

im not sure what im gonna do yet in that respect. im leaving the fender liners out for now, ill reinstall them once i know what i want to do.

negative feedback is cool. keep the opinions coming.

SikMindz · 04-08-2006, 02:56 PM

Dude.

Wash your car. LoL

Looks good. Cosign what everyone else says. I wonder what they'd look like on a car w/o the ribs though.

charlie72438 · 04-08-2006, 03:18 PM

other than that is it a good fit, i mean with the hood and door and bumper all the lines look pretty good on it, because i have their kit and it dont fit worth a ****

onesexyga · 04-08-2006, 04:56 PM

Doesnt do anything for the car imo. Im person i imagine id pick up the overlap immediately and it would ruin it. Wheres your inner fender?

rennation · 04-08-2006, 08:59 PM

theyre nice but i think for the cost of it in the end, you shoulda went for an sc/t kit

04-08-2006, 10:49 PM

personally i like them way better than OTHERZZ

ganut · 04-08-2006, 11:58 PM

I think I said this before, but I'd rather have the overlap of the ribs than to have the vent be like an inch away from the wheel arch.

notsoaveragej0e · 04-09-2006, 01:32 AM

caraudiodave · 04-09-2006, 09:09 AM

thanks everyone. i knew these fenders would bring mixed results.

1) they actually dont really fit right. ive had tomassage them in there to get them in right. its like they used stock fenders, but then changed them just enough to require some modding. kinda wierd.

2) i have wanted the SCT kit for a while but for what this cost me i would have gotten the SCT kit but not painted. SCT kit would have cost me more, plus one of my stock fenders was bad.

3) im leaving my fender liners off until i know what im doing with my vents. right now im thinking about running turn singals into them so that they reflect off the vents.

notsoaveragej0e · 04-09-2006, 02:35 PM

Quote:

Originally Posted by caraudiodave

3) im leaving my fender liners off until i know what im doing with my vents. right now im thinking about running turn singals into them so that they reflect off the vents.

Do that; it would look sweet.

04-10-2006, 09:11 AM

Love them! Nice job!

04-08-2006, 01:40 PM	#1
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	Andys fender install finally done ok so after 4 weeks (ive been really busy) i finally finished my fender install this morning. here they are all done: i actualy like how the rockers overlap the bottom vent...it looks way better than i expected. lets hear it everyone...i wanna hear good and bad comments. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

04-08-2006, 01:41 PM	#2
Hodge Chrome Wheel Lover AKA: CK Join Date: Jun 2004 Location: Michigan Age: 33 Posts: 1,496 Vehicle: 2000 Grand Am Se	lets see some farther away shots.. i like them though! __________________ 2000 Grand Am SE

04-08-2006, 01:42 PM	#3
blake bob's back! AKA: blake Join Date: Aug 2002 Location: florence, sc Age: 36 Posts: 2,036 Vehicle: 06 xterra	dont like how the rockers overlap myself, but they do look nice __________________ eh. the cardomain of my old grand am gt

04-08-2006, 01:42 PM	#4
DrFabulous FIGJAM AKA: Matt Join Date: Mar 2004 Location: MN Posts: 9,675 Vehicle: Acura\|Chevy\|Porsche	Personally..... I'd be pissed when I found out the fenders get covered by stock body parts. Seems like a bone-headed move by AAS. __________________ '18 Acura MDX Kid hauler '15 Chevrolet Tahoe Toy Hauler '01 Porsche Boxster Project

04-08-2006, 01:50 PM	#7
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	i knew about the overlap when i got the fenders. i didnt care. as far as far away shots....thats kinda funny. since the car has been sitting for 4 weeks my new optima redtop is dead. i now have the rest of the day to find a way of getting it started (jump it off my other car) and figure out if my alternator is dead too. this morning i jumped it and let it run for 1/2 hour. when i went to shut off the engine the voltage had dropped to 13 volts. now its at < 8 volts. ill get pics as soon as i figure out the issue and wash the car. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

04-08-2006, 01:46 PM	#5
El_Diablo Racin the bu'! AKA: John Join Date: Jan 2006 Location: Oakmont (Pittsburgh), PA Age: 33 Posts: 325 Vehicle: 1998 Malibu LS	no, the fenders were designed to work with their skirts and other aftermerkat skirts personally i hate the ribs, and if i had a GA, they would be the first thing to go

04-08-2006, 02:07 PM	#8
notsoaveragej0e Causes a ruckus AKA: Joe Join Date: Jun 2004 Location: Detroit, MI Age: 34 Posts: 5,011 Vehicle: Maligoat	I don't think the over lap looks that terrible, I think most of us notice it because we are looking for it. The average person will not notice something like that, i dont think. Are you going to do any lighting or anything behind it like another member on here did (I think GlisteningWhite)? __________________

04-08-2006, 02:54 PM	#10
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	im not sure what im gonna do yet in that respect. im leaving the fender liners out for now, ill reinstall them once i know what i want to do. negative feedback is cool. keep the opinions coming. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

04-08-2006, 03:18 PM	#12
charlie72438 GAGT - Member Join Date: Nov 2005 Location: LEACHVILE, AR Posts: 125 Vehicle: 99 GRAND AM GT	other than that is it a good fit, i mean with the hood and door and bumper all the lines look pretty good on it, because i have their kit and it dont fit worth a ****

04-08-2006, 04:56 PM	#13
onesexyga onesexyfiero AKA: Kevin Join Date: Sep 2004 Location: Vermont/New Hampshire Age: 35 Posts: 1,534 Vehicle: 00 GAGT, 88 Fiero GT	Doesnt do anything for the car imo. Im person i imagine id pick up the overlap immediately and it would ruin it. Wheres your inner fender?

04-08-2006, 08:59 PM	#14
rennation hoodrich inc. AKA: Matt Join Date: Sep 2004 Location: Novi, Michigan Coolness Level: 6729 Age: 33 Posts: 920 Vehicle: '04 GA SE 2.2L	theyre nice but i think for the cost of it in the end, you shoulda went for an sc/t kit __________________ Flickr. The University of Michigan

04-08-2006, 10:49 PM	#15
cztmga Guest Posts: n/a	personally i like them way better than OTHERZZ

04-08-2006, 11:58 PM	#16
ganut 00redse AKA: Mike Join Date: Sep 2004 Location: AZ Age: 40 Posts: 853 Vehicle: 00 GASE	I think I said this before, but I'd rather have the overlap of the ribs than to have the vent be like an inch away from the wheel arch. __________________ My Car supercharged alcohol injected kitted lot's o goodies

04-09-2006, 01:32 AM	#17
notsoaveragej0e Causes a ruckus AKA: Joe Join Date: Jun 2004 Location: Detroit, MI Age: 34 Posts: 5,011 Vehicle: Maligoat	__________________

04-09-2006, 09:09 AM	#18
caraudiodave Boring old man AKA: Dave Join Date: Sep 2005 Location: Wood ranch, ca Age: 41 Posts: 2,172 Vehicle: '13 Camry hybrid	thanks everyone. i knew these fenders would bring mixed results. 1) they actually dont really fit right. ive had tomassage them in there to get them in right. its like they used stock fenders, but then changed them just enough to require some modding. kinda wierd. 2) i have wanted the SCT kit for a while but for what this cost me i would have gotten the SCT kit but not painted. SCT kit would have cost me more, plus one of my stock fenders was bad. 3) im leaving my fender liners off until i know what im doing with my vents. right now im thinking about running turn singals into them so that they reflect off the vents. __________________ 2013 Toyota Camry hybrid: Pioneer AVIC-8000NEX, Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.3 (300 x 2), Phoenix Gold ZPA0.5 (1000 x 1), Dynaudio MD100 (1" tweeters), Dynaudio MW160 (6.5" mids), Eclipse SW8812 (12" aluminum cone subwoofer)

04-10-2006, 09:11 AM	#20
ProjectGT Guest Posts: n/a	Love them! Nice job!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode