Michigan Roll Call - Page 5

Tweeter · 02-27-2007, 11:48 AM

I am still here, Looking for an Engine rebuild, I need to get the GA back up and running soon. The wife and I both miss driving it. good to see some old faces I know still on this site.

Arron,

I have not seen your car in a long time. Good job on it, it looks great.

notsoaveragej0e · 02-27-2007, 12:55 PM

Quote:

Originally Posted by athomas

Been there, done that!

I'm in Rochester Hills with an 06 G6 GTP

Hey me too! schweet.

AaronGTR · 02-27-2007, 06:38 PM

Quote:

Originally Posted by Tweeter

I am still here, Looking for an Engine rebuild, I need to get the GA back up and running soon. The wife and I both miss driving it. good to see some old faces I know still on this site.

Arron,

I have not seen your car in a long time. Good job on it, it looks great.

Hey Chad. Thanks man, I haven't seen you in a long time too, how have you been? Glad to hear you still got the car, but sad to hear it's out of commission. What happened to the engine?

Tweeter · 02-27-2007, 07:18 PM

The oil pump locked up and broke the Cam!!! Not happy about it, This summer I am going to be pulling the engine out and going threw it. Was not a good sound to hear it brake. Oil pressure started acting up, about a mile from home it broke the cam. I thought it was just the oil pump so I replaced the oil pump. Put it back together and it was knocking. Call the dealer and told them what happen. Two different shops both said the same thing. Broke the Cam. Had a guy at work did the same thing to his 3.1L.

H.O. Driver · 02-28-2007, 07:53 AM

Haven't seen that screen name in a while. Didn't you get a different cam or no? Thats kind of scary that the oil pump did that, but I guess it could happen with extreme driving conditions. Hope you can get it up and running again, do you still plan to autox with it?

AaronGTR · 02-28-2007, 08:22 AM

Dang, that sucks. I guess thats what can happen with a hollow core cam. Hopefully it didn't damage the cam bearings or any of the rest of the valvetrain. I'd pull the heads off and check the valves, pushrods, rockers etc just to be sure. At least you'll have a chance to update all the gaskets though. Do you have all the parts already?

Tweeter · 02-28-2007, 10:02 AM

Quote:

Originally Posted by H.O. Driver

Haven't seen that screen name in a while. Didn't you get a different cam or no? Thats kind of scary that the oil pump did that, but I guess it could happen with extreme driving conditions. Hope you can get it up and running again, do you still plan to autox with it?

No, I never got the cam for it. I am looking into doing it this summer. As for Autocross, I have a neon for that. That is why the Grand AM has been setting for now. Trying to get the neon the way I want it. I have some work to do to it this spring and than I am moving to the Grand Am.

Tweeter · 02-28-2007, 10:06 AM

Quote:

Originally Posted by AaronGTR

Dang, that sucks. I guess thats what can happen with a hollow core cam. Hopefully it didn't damage the cam bearings or any of the rest of the valvetrain. I'd pull the heads off and check the valves, pushrods, rockers etc just to be sure. At least you'll have a chance to update all the gaskets though. Do you have all the parts already?

That is what I was plaining on doing this summer, I am hoping the valve Train is ok. If not will have to upgrade it. If the cam bearing are bad than I may just pick up a different Engine. If it is ok I am wanting to get a aftermarket cam and do alittle head work. And do all the port matching on everything!!

Have to see how things go this summer.

Jokerz2k5 · 02-28-2007, 06:32 PM

oakland county =]

ortonville/Clarkston/Waterford

athomas · 03-05-2007, 02:28 PM

Holy Crap....... Chad's still around? Aaron?? Good heavens it's been 3 years since I've seen you guys..... AT LEAST!!

Lets get together soon!

AaronGTR · 03-05-2007, 07:18 PM

Heck yeah, there are so many new members on this site from SE michigan too... I think we should try and organize a spring meet of some sort when the weather warms up. Maybe even go cruising or something after xceedspeed.com's spring BBQ at stoney creek or something like that.

athomas · 03-06-2007, 11:08 AM

I'd certainly be up for it. The G6 is pretty well stock right now, but I'm up for hanging out.

P.S. Aaron, the car is looking great!

athomas · 03-08-2007, 02:13 PM

so when do we all want to get together?

coupe · 03-08-2007, 03:54 PM

spring MGM

AaronGTR · 03-08-2007, 11:08 PM

^haha, now there's an idea. Hopefully I'll have the car out of storage by then though and be able to make it. I forget when they usually hold that. I know I keep saying I'll run my car at the next one too but.... things are really busy right now and I have a lot of tuning to do still and wheels and DR's to buy yet, so dunno if I can yet.

Still I think we detroit area people were thinking of somewhere closer to meet up than Stanton.

sjones419 · 03-09-2007, 06:47 AM

Quote:

Originally Posted by AaronGTR

Heck yeah, there are so many new members on this site from SE michigan too... I think we should try and organize a spring meet of some sort when the weather warms up. Maybe even go cruising or something after xceedspeed.com's spring BBQ at stoney creek or something like that.

Whatever is goin on, let me in, eventhough im from Toledo. No body around this area gets togeather and does enough.

Gold99HO · 03-09-2007, 08:29 AM

Quote:

Originally Posted by coupe

spring MGM

hey ill be there cant wait to see u all again

coupe · 03-09-2007, 08:44 AM

Spring MGM is april 21st 11am-6pm and the track has been re-surfaced.

I will be there like always, dunno if im racing yet though, but i will be there.

archillasvante · 03-09-2007, 11:15 AM

as long as i know details way ahead of time i'm game...

just don't want it to be like last year where i got there and left and found out everyone else was there either before or after except for Nikki...

i'd like to get a base run of the GTP anyway...

athomas · 03-09-2007, 12:30 PM

Quote:

Originally Posted by AaronGTR

Hey Adam, long time no see! How you been man? Got a new G6 GTP huh. How you like it?

I'm doing well my friend. I did get a g6 GTP. It's the gray coupe with an auto.

So far so good. I got it as a demo from Noonan (surprise!) Morley gave me a pretty good deal on it, and gave me what I owed on the '03 30th GA that I had.

It as all first model year cars has had it's quirks. I had the injectors replaced about a month ago due to failure in the #3. But it was nothing that left me stranded. It just threw a few codes

I know there are little things I can do with it, but I've been so busy recently with other things I just haven't had the time.

Dad and I are currently working on a '23 T-Bucket project as well, so that's eaten up some time and $$ as well.

02-27-2007, 11:48 AM	#81
Tweeter Need new engine!!!!! AKA: Chad Join Date: Aug 2002 Location: Carleton, Michigan Age: 46 Posts: 163 Vehicle: 1999 Grand Am GT	I am still here, Looking for an Engine rebuild, I need to get the GA back up and running soon. The wife and I both miss driving it. good to see some old faces I know still on this site. Arron, I have not seen your car in a long time. Good job on it, it looks great. __________________ Tweeter Tweeter's Ride Last edited by Tweeter; 02-27-2007 at 12:07 PM.

02-27-2007, 07:18 PM	#84
Tweeter Need new engine!!!!! AKA: Chad Join Date: Aug 2002 Location: Carleton, Michigan Age: 46 Posts: 163 Vehicle: 1999 Grand Am GT	The oil pump locked up and broke the Cam!!! Not happy about it, This summer I am going to be pulling the engine out and going threw it. Was not a good sound to hear it brake. Oil pressure started acting up, about a mile from home it broke the cam. I thought it was just the oil pump so I replaced the oil pump. Put it back together and it was knocking. Call the dealer and told them what happen. Two different shops both said the same thing. Broke the Cam. Had a guy at work did the same thing to his 3.1L. __________________ Tweeter Tweeter's Ride

02-28-2007, 07:53 AM	#85
H.O. Driver I drive a V6 H.O. AKA: Timmah! Join Date: Aug 2002 Location: Boyne City, MI Age: 38 Posts: 2,694 Vehicle: 99 GT, 03 DTS, 04 SRX	Haven't seen that screen name in a while. Didn't you get a different cam or no? Thats kind of scary that the oil pump did that, but I guess it could happen with extreme driving conditions. Hope you can get it up and running again, do you still plan to autox with it? __________________ 1999 GA GT - lots of mods - Sold and missing it... 2001 GP GTP Special Edtion - Sold 2002 T/A - T-Tops, AT, LS6 intake, mainly stock - Sold 2003 Cadillac DTS - Gangsta Grandpa car - Gone 2004 Cadillac SRX - Baby hauler -Sold and missing it Life is too short to drive boring cars....why is that all I have now??????

02-28-2007, 08:22 AM	#86
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Dang, that sucks. I guess thats what can happen with a hollow core cam. Hopefully it didn't damage the cam bearings or any of the rest of the valvetrain. I'd pull the heads off and check the valves, pushrods, rockers etc just to be sure. At least you'll have a chance to update all the gaskets though. Do you have all the parts already? __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package. Last edited by AaronGTR; 02-28-2007 at 08:24 AM.

03-05-2007, 07:18 PM	#91
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Heck yeah, there are so many new members on this site from SE michigan too... I think we should try and organize a spring meet of some sort when the weather warms up. Maybe even go cruising or something after xceedspeed.com's spring BBQ at stoney creek or something like that. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

02-28-2007, 06:32 PM	#89
Jokerz2k5 User account under probation AKA: Don Join Date: Feb 2006 Location: Oakland County Michigan Age: 34 Posts: 264 Vehicle: Looking	oakland county =] ortonville/Clarkston/Waterford

03-05-2007, 02:28 PM	#90
athomas GAGT - Member AKA: Adam Join Date: Aug 2002 Location: Lake Orion MI Age: 41 Posts: 711 Vehicle: 2004 Pontiac GTO	Holy Crap....... Chad's still around? Aaron?? Good heavens it's been 3 years since I've seen you guys..... AT LEAST!! Lets get together soon!

03-06-2007, 11:08 AM	#92
athomas GAGT - Member AKA: Adam Join Date: Aug 2002 Location: Lake Orion MI Age: 41 Posts: 711 Vehicle: 2004 Pontiac GTO	I'd certainly be up for it. The G6 is pretty well stock right now, but I'm up for hanging out. P.S. Aaron, the car is looking great!

03-08-2007, 02:13 PM	#93
athomas GAGT - Member AKA: Adam Join Date: Aug 2002 Location: Lake Orion MI Age: 41 Posts: 711 Vehicle: 2004 Pontiac GTO	so when do we all want to get together?

03-08-2007, 03:54 PM	#94
coupe lick it AKA: Rand Join Date: May 2003 Location: Grand Rapids, Mi Age: 40 Posts: 7,347 Vehicle: 99 GAGT/96 Z71/05 R6	spring MGM __________________ CarDomain.com http://profile.myspace.com/index.cfm...endID=31690558 he has asserted his dominance over competing males with the loud masculine sound form his exaust system, Females searching for a potential mate will be driven away by weaker exaust systems and attracted to his SLP.

03-08-2007, 11:08 PM	#95
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	^haha, now there's an idea. Hopefully I'll have the car out of storage by then though and be able to make it. I forget when they usually hold that. I know I keep saying I'll run my car at the next one too but.... things are really busy right now and I have a lot of tuning to do still and wheels and DR's to buy yet, so dunno if I can yet. Still I think we detroit area people were thinking of somewhere closer to meet up than Stanton. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

03-09-2007, 08:44 AM	#98
coupe lick it AKA: Rand Join Date: May 2003 Location: Grand Rapids, Mi Age: 40 Posts: 7,347 Vehicle: 99 GAGT/96 Z71/05 R6	Spring MGM is april 21st 11am-6pm and the track has been re-surfaced. I will be there like always, dunno if im racing yet though, but i will be there. __________________ CarDomain.com http://profile.myspace.com/index.cfm...endID=31690558 he has asserted his dominance over competing males with the loud masculine sound form his exaust system, Females searching for a potential mate will be driven away by weaker exaust systems and attracted to his SLP.

03-09-2007, 11:15 AM	#99
archillasvante Fav. Grocery Getter AKA: Stephen Join Date: Jan 2006 Location: Sterling Heights, MI Age: 37 Posts: 213 Vehicle: 2006 White G6 GTP 6MT	as long as i know details way ahead of time i'm game... just don't want it to be like last year where i got there and left and found out everyone else was there either before or after except for Nikki... i'd like to get a base run of the GTP anyway... __________________ Steve C. Blue 2000 Grand AM SE2 Coupe Red 1991 Dodge Daytona v6 IROC - RIP 1991-2006 White 2006 G6 GTP 6MT Sedan Mynd you, m00se bites Kan be pretty nasti...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode