Part Out! Custom headlights/taillights, 2.4 go fast parts, misc. stuff

[BadBlack00Ga]

Hey All,

Had an incident with my Grand Am almost a year ago now and have still been sitting on this huge pile of parts. Spring is rolling around and I'd like some cash for my new project (95' Eagle Talon TSi) Prices are pretty firm as everything is already priced to sell. If interested in more then one item we can work out some deals. All engine parts are for the 2.4 TC. Buyer is responsible for shipping costs!



Custom projector headlights. The ones built by mcgyver and then modified further by pyro. I bought these from pyro and didn't get a chance to put them on my car. There is a small crack in the housing of one of them that happened during shipping. Nothing a little bondo can't fix. These include Bulbs and Ballasts! If no one buys them I'm gonna hack them up and use them on another project!
Headlights
(hope you don't mind me using your link pyro)
SOLD

Custom LED Tails. These were custom made by yours truly. There are 10 superflux LED's in each cluster for a total of 40. There is one small crack in the lens about 1 inch in length that was made while I was clearing them. These look badass and were my favorite visual mod I made to the car.

Yet another set of LED tails
$200

PFYC Front and Rear STB's
Rear is black and front was red and then poorly painted black by previous owner. Front one could stand to be touched up

SOLD

Dual Aeroforce Interceptors w/ dual gauge pod, black faced w/ black/white screens. These are the earlier models without the shift light.
$250

12" F-body Brake upgrade. Calipers, brackets, pads and rotors. Rotors have been sitting for a while and will need to be machined. 12", crossdrilled and cadmium coated. This setup was used on my car for less then 5,000km. This stuff cost me almost $1000, I don't expect many people to be interested in used brakes so thats why theyre priced so low.


SOLD

RSM/Z-spec ported intake manifold and TB. TB is hogged out to 63mm as measured by my caliper here at home. Manifold is port matched. Will separate if there is interest in both parts sepeartly, otherwise they're not worth much separated.
Its really dirty, but you get the idea.

$200 for the pair Tentatively Sold

Brand New T3 Log style turbo manifold, no external W/G

$110

Brand New Garrett TB0359 Turbocharger. Nice, quick spooling turbo for a 2.4. .48 Turbine housing .42 Compressor housing. Internally Gated
$300



Brand new in box Accel AFPR. Direct stock replacement with full adjustment from 30-70psi.
Link to Summit Racing

$60

Stock headlights with black vinyl overlays, little hazy but not bad.
$35

Power 02.5-05 Side Mirrors (Mickey Mouse style)
$35

Manual (non-power) 99-02.5 Side Mirrors (dual post)
SOLD

White front plate filler with blue overlay
$10


GTS Blacked out headlight covers
$20

Brand new in box NTK Oxygen Sensor, rear sensor.
$50

Brand new in box Rear Hub Assembly. National Hub Assemblies brand. This was the most expensive one I could get from my parts guy. I think I paid around $180.
$80

Stock Intake Manifold
$20

Stock TB w/ MAP sensor
$30

Cup-holder Ipod dock. This actually fits perfectly into the center vent holes and looks wicked in there. I wired in some blue LED's into the back of it so it glows a BRIGHT blue.
$20






I'll be adding more misc. stuff later on. Contact me via PM or e-mail me at claytonclancy@hotmail.com. Thanks for looking!

[Nick_Wa]

Tails look great, I like em. Nice stuff good luck with selling, I wish you had Pyro's tails and up for sale haha.

[juanvan]

Interested in the ipod dock Pic?

[Gagt518]

E-mail Sent for UIM

[ajt]

Dibs on STBs. Can you post some pics and what would shipping be to IN 47807?

[Elderas]

Ill take the mirrors. dual post ones

PM me ur paypal

[BadBlack00Ga]

Originally Posted by Nick_Wa

Tails look great, I like em. Nice stuff good luck with selling, I wish you had Pyro's tails and up for sale haha.

Thanks!


All PM's and e-mails replied to!

[BadBlack00Ga]

Bump!

[intmd8r]

Where in Ontario are you located?

[BadBlack00Ga]

I'm in Mississauga.

[BadBlack00Ga]

More pics and new items added!

[BadBlack00Ga]

Updated new prices on almost everything!

[tonySE1]

Got pics of headlamp covers?

[Rich]

please, dont take apart the headlights. that would be tragic.

[PhantomLover007]

The tails look pretty nice. Kinda like the Spider Lights I was looking into maybe doing later.

[FuriousG]

Stock headlights with black vinyl overlays, little hazy but not bad.
$40

Got pics?

Also, do the stock Torqued Chrometechs fit over the brake upgrade? I still plan on keeping my 16"s for the winters.

[BadBlack00Ga]

I'll post pics of headlight covers and stock headlights in the morning.

I'm not 100% sure if the brakes will fit under stock chrometechs, from what I've read from other people doing similar swaps, they will fit, but I didn't have a set to test out personally.

[Nick_Wa]

That is a great price for the vette brakes, do you know if they would fit on an 05 mustang gt? My buddy is wondering, or can you point me in the direction to find out? Thanks.

[Ajaxus]

gah! I want those headlights..well, if my car audio **** sells soon and those are still around I'll probably pick them up..*crosses fingers*

Originally Posted by Nick_Wa

Tails look great, I like em. Nice stuff good luck with selling, I wish you had Pyro's tails and up for sale haha.

those tails are MINE! (you can look at them at the midwest meet tho..)

[BadBlack00Ga]

Originally Posted by Nick_Wa

That is a great price for the vette brakes, do you know if they would fit on an 05 mustang gt? My buddy is wondering, or can you point me in the direction to find out? Thanks.

I'm 99% sure they won't work on a mustang. We just happened to be lucky enough that the camaro/vette caliper brackets mounted onto our cars. I can't see them bolting up to a Ford without any problems, I could be mistaken though.