SC Pulley

08-26-2002, 03:19 PM

I have my new SC pulley installed. Whoa, this baby really kicks now. The pulley size is 2.5" and it gives about 2 psi more boost. Now, that is 7-8 psi of max boost in the K-ride. Can't wait for E-Town on Saturday. WOOO Doggie!

AaronGTR · 08-26-2002, 08:46 PM

Got any pics? Where can I get one?

I've been thinking of picking up TIG welding this winter, and if I do I'm going to make a custom intercooler setup. A smaller pulley would be perfect with that! It all depends on how money is, cause TIG welding equipment ain't cheap.

08-26-2002, 09:01 PM

Quote:

Originally posted by AaronGTR
Got any pics? Where can I get one?

I've been thinking of picking up TIG welding this winter, and if I do I'm going to make a custom intercooler setup. A smaller pulley would be perfect with that! It all depends on how money is, cause TIG welding equipment ain't cheap.

I'll have pics up tomorrow of the pulley. I bought it online, www.pulleyboys.com

Sternie · 08-26-2002, 10:42 PM

It's gonna be interesting to see what you're running KMan, you SC guys are getting faster and faster all the time with more tuning.

Tony

08-27-2002, 06:02 AM

Make sure you get a stronger alternator? Didn't FastSteve blow his because of his pully? Nice job K! Good luck man!

Roush GT · 08-27-2002, 06:07 AM

Quote:

Originally posted by Macleod52
Make sure you get a stronger alternator? Didn't FastSteve blow his because of his pully? Nice job K! Good luck man!

faststeve had an underdrive pulley from RAT...

08-27-2002, 06:07 AM

Quote:

Originally posted by Macleod52
Make sure you get a stronger alternator? Didn't FastSteve blow his because of his pully? Nice job K! Good luck man!

Steve was using an "Underdrive Pulley". The pulley I have, spins the SC up a little faster. The underdrive pulley slows down the the accessory and that is what kills the alternator.

Irate · 08-27-2002, 07:49 AM

I thought steve had his pulleys from SA, anyways, he had a set of three underdrive pulleys... three pulleys = three hours we had to help him alongside some god forsaken highway in lansing

NOTE TO ALL GA OWNERS! Don't get the underdrive pulleys

Can't wait to see you guys on saturday, I'm looking forward to seeing how you car's running kman, any tranny slips?

mfuller · 08-27-2002, 07:56 AM

Quote:

Originally posted by IrateGT
I thought steve had his pulleys from SA, anyways, he had a set of three underdrive pulleys... three pulleys = three hours we had to help him alongside some god forsaken highway in lansing

RAT underdrive pullies=alternator pulley and water pump pulley. Bear in mind, his car is also a 99 and was on the original alternator - how many other people have lost their OEM alternator that were not running underdrive pullies? Yeah, I know....big stereo, right? Maybe, but are we all saying to stop installing upgraded sound systems?
All modifications have a positive and a negative....just have to acknowledge the risk and accept the trade-off.

Irate · 08-27-2002, 08:05 AM

Quote:

Originally posted by mfuller

RAT underdrive pullies=alternator pulley and water pump pulley. Bear in mind, his car is also a 99 and was on the original alternator - how many other people have lost their OEM alternator that were not running underdrive pullies? Yeah, I know....big stereo, right? Maybe, but are we all saying to stop installing upgraded sound systems?
All modifications have a positive and a negative....just have to acknowledge the risk and accept the trade-off.

thanks matt

jaketuff · 08-27-2002, 09:16 AM

YEEE-HA!

2.4 Inch Pulley on order!!! But look out, I relayed to SPAZ the site, and he is considering his options...

What an excellent site though. Glad to hear that they are so good service-wise. 2.4" pulley should give me about 20HP/lbs... there is a 2" pulley available for when I get headers and exhaust mods to rebuild any lost psi.

Should be awesome at the track if I can get the tires to plant well!!!!

Kman how long will it take to ship here? I believe that priority mail is about two days. Did it take much longer to reach you?

Pat

mfuller · 08-27-2002, 09:26 AM

So, which one of the Boost Brothers will be the first to monitor air temps after the SC? I have an inkling that it's going to get rather steamy with a 2.4-2.5" pulley....also interested to see what kind of KR you guys will be seeing. Water injection, anyone?

jaketuff · 08-27-2002, 10:59 AM

Quote:

Originally posted by mfuller
So, which one of the Boost Brothers will be the first to monitor air temps after the SC? I have an inkling that it's going to get rather steamy with a 2.4-2.5" pulley....also interested to see what kind of KR you guys will be seeing. Water injection, anyone?

KR is possible when it is so warm and humid. But when the air cools and dries out in the fall we will be seeing much more output from these pullies. Right now the heat will limit the usable boost pressure.

Water injection could be helpful nonetheless, after the SC. But why rig that for just hot temps... Worse come to worse I will change back to my 2.8" pulley and wait for the cooler weather to run the smaller pulley. Now to really cool things, the best way is with NOS, but that is only temporary and lacks the always on feature of the SC. But it is probably a lot cheaper and easier than the IC.

JouT

08-27-2002, 11:02 AM

I gotcha guys I didn't know there was a SC pulley. I guess you learn something new every day

08-27-2002, 02:16 PM

Quote:

Originally posted by jaketuff
YEEE-HA!

2.4 Inch Pulley on order!!! But look out, I relayed to SPAZ the site, and he is considering his options... What an excellent site though. Glad to hear that they are so good service-wise. 2.4" pulley should give me about 20HP/lbs... there is a 2" pulley available for when I get headers and exhaust mods to rebuild any lost psi.

Should be awesome at the track if I can get the tires to plant well!!!!

Kman how long will it take to ship here? I believe that priority mail is about two days. Did it take much longer to reach you?

Pat

I had my pulley in 2 days.

08-27-2002, 02:20 PM

Quote:

Originally posted by IrateGT
I thought steve had his pulleys from SA, anyways, he had a set of three underdrive pulleys... three pulleys = three hours we had to help him alongside some god forsaken highway in lansing

NOTE TO ALL GA OWNERS! Don't get the underdrive pulleys Can't wait to see you guys on saturday, I'm looking forward to seeing how you car's running kman, any tranny slips?

No tranny slips to date. I have the ASE chip and the shifts are firm. I hope to kick a## at E-Town. I want low 14's, if possible.

08-27-2002, 04:38 PM

Quote:

Originally posted by AaronGTR
Got any pics? Where can I get one?

I've been thinking of picking up TIG welding this winter, and if I do I'm going to make a custom intercooler setup. A smaller pulley would be perfect with that! It all depends on how money is, cause TIG welding equipment ain't cheap.

Here are a few pics of the pulley and an overall engine shot.

08-27-2002, 04:39 PM

A second pic at a different angle.

08-27-2002, 04:41 PM

The last, an engine shot.

mfuller · 08-27-2002, 04:45 PM

That's one small pulley. Is it a keyed or press-on pulley?

08-26-2002, 03:19 PM	#1
MetaGTP1 Guest Posts: n/a	SC Pulley I have my new SC pulley installed. Whoa, this baby really kicks now. The pulley size is 2.5" and it gives about 2 psi more boost. Now, that is 7-8 psi of max boost in the K-ride. Can't wait for E-Town on Saturday. WOOO Doggie!

08-26-2002, 08:46 PM	#2
AaronGTR BlingWithBallz AKA: Aaron Join Date: Aug 2002 Location: Detroit area, MI Age: 43 Posts: 12,254 Vehicle: 2000 Grand Am GT1 2dr	Got any pics? Where can I get one? I've been thinking of picking up TIG welding this winter, and if I do I'm going to make a custom intercooler setup. A smaller pulley would be perfect with that! It all depends on how money is, cause TIG welding equipment ain't cheap. __________________ The few, the proud, the boosted! 13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011) See it here. the total package.

08-27-2002, 07:49 AM	#8
Irate Irasshaimase AKA: Rob Join Date: Aug 1976 Location: Albany vs. Oneonta vs. Philly Posts: 17,481 Vehicle: its "vehico"	I thought steve had his pulleys from SA, anyways, he had a set of three underdrive pulleys... three pulleys = three hours we had to help him alongside some god forsaken highway in lansing NOTE TO ALL GA OWNERS! Don't get the underdrive pulleys Can't wait to see you guys on saturday, I'm looking forward to seeing how you car's running kman, any tranny slips? __________________ R6 \| STi \| GC Jeep

08-27-2002, 09:16 AM	#11
jaketuff GAGT - Senior Member Join Date: Aug 2002 Location: Westchester, NY Age: 43 Posts: 2,093 Vehicle: 2000 Grand Am GT Coupe	YEEE-HA! 2.4 Inch Pulley on order!!! But look out, I relayed to SPAZ the site, and he is considering his options... What an excellent site though. Glad to hear that they are so good service-wise. 2.4" pulley should give me about 20HP/lbs... there is a 2" pulley available for when I get headers and exhaust mods to rebuild any lost psi. Should be awesome at the track if I can get the tires to plant well!!!! Kman how long will it take to ship here? I believe that priority mail is about two days. Did it take much longer to reach you? Pat __________________ 2000 Pontiac Grand Am GT Coupe Magnacharger SC February 2003 N-body of the Month 14.34 @ 93.38MPH Eaton SC, No ported heads, No Juice! -RETIRED March 2010 w/165k- 2013 Mercedes ML350 !ACHTUNG! Es ist Shtock 2005 Infiniti G35 Coupe : CAI, Manifold Spacer 2004 Pontiac GTO : Mild Mods, and Tuned ... 13.1 @ 107.5 PB 1992 Mustang LX : TT, 351, IC, Alky, Gears - 400HP/500lbs-ft ... MONSTER 1991 Mustang GT : GT40 H/I, Bullitt Wheels, New Paint

08-27-2002, 09:26 AM	#12
mfuller Mr. Common Sense AKA: Matt Join Date: Aug 2002 Location: Loves Park, IL USA Age: 47 Posts: 2,031 Vehicle: 2000 Alero GLS sedan	So, which one of the Boost Brothers will be the first to monitor air temps after the SC? I have an inkling that it's going to get rather steamy with a 2.4-2.5" pulley....also interested to see what kind of KR you guys will be seeing. Water injection, anyone? __________________ Matt - Resident brake and suspension guru Also, your friendly Performance and Technical Moderator *Please don't tailgate, text and drive, drink and drive, or otherwise act like an asshat.* Questioning if it will ever run again.....

08-26-2002, 10:42 PM	#4
Sternie Back-to-Back Champs! Join Date: Aug 2002 Location: Duluth/Minneapolis, MN Age: 37 Posts: 247 Vehicle: 2000 Grand Am GT	It's gonna be interesting to see what you're running KMan, you SC guys are getting faster and faster all the time with more tuning. Tony

08-27-2002, 06:02 AM	#5
Macleod52 Guest Posts: n/a	Make sure you get a stronger alternator? Didn't FastSteve blow his because of his pully? Nice job K! Good luck man!

08-27-2002, 11:02 AM	#14
Macleod52 Guest Posts: n/a	I gotcha guys I didn't know there was a SC pulley. I guess you learn something new every day

08-27-2002, 04:39 PM	#18
MetaGTP1 Guest Posts: n/a	A second pic at a different angle.

08-27-2002, 04:41 PM	#19
MetaGTP1 Guest Posts: n/a	The last, an engine shot.

08-27-2002, 04:45 PM	#20
mfuller Mr. Common Sense AKA: Matt Join Date: Aug 2002 Location: Loves Park, IL USA Age: 47 Posts: 2,031 Vehicle: 2000 Alero GLS sedan	That's one small pulley. Is it a keyed or press-on pulley? __________________ Matt - Resident brake and suspension guru Also, your friendly Performance and Technical Moderator *Please don't tailgate, text and drive, drink and drive, or otherwise act like an asshat.* Questioning if it will ever run again.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode