NEW PFYC.com Sway Bar Group Buy - Page 6

Hodge · 04-08-2008, 08:09 PM

i think i might be interested in both..

its $300 total with shipping or what is the final costs, thats what i need to know before i commit

GrandAmC9 · 04-08-2008, 08:44 PM

depending on when this is gunna happen im in for front and rear

Rich · 04-08-2008, 09:21 PM

Quote:

Originally Posted by Hodge

i think i might be interested in both..

its $300 total with shipping or what is the final costs, thats what i need to know before i commit

from the last time:

Quote:

It's $75 per bar - so if you want both front and rear it's $150 pre-paid. Shipping is expensive, probably $40-60 for two bars and around $30-40 for one. The bars are priced at $139.99 each.

-- Brian A. Marks
PFYC

Quote:

Originally Posted by GrandAmC9

depending on when this is gunna happen im in for front and rear

it happens as soon as we have everyone. so the sooner you get in on it the better.

alerored04 · 04-08-2008, 10:11 PM

Thanks Rich. We need to fill 20 fronts and 20 rears before they will take our order, so once we are full then it will move forward. Until that day we sit where we are.

timberwoof · 04-08-2008, 10:26 PM

Quote:

Originally Posted by alerored04

Thanks Rich. We need to fill 20 fronts and 20 rears before they will take our order, so once we are full then it will move forward. Until that day we sit where we are.

So that would be twidling our thumbs hoping it happens soon?

surreal_awakeni · 04-08-2008, 10:54 PM

We need good, strong committed buyers. We're close here, peeps. Just a few more definite orders and we'll be all set.

AeR0 · 04-09-2008, 12:29 AM

Quote:

Originally Posted by surreal_awakeni

We need good, strong committed buyers. We're close here, peeps. Just a few more definite orders and we'll be all set.

as long as nobody backs out....

surreal_awakeni · 04-09-2008, 06:10 AM

Just think, economic stimulus checks come in May. What better way to stimulate the economy? Buy now, people! You'll get the money back in a month!!!

alerored04 · 04-09-2008, 11:36 AM

Quote:

Originally Posted by timberwoof

So that would be twidling our thumbs hoping it happens soon?

What else should i be doing?

HaVoK~DOGZ~ · 04-09-2008, 08:36 PM

I Just Hope Everyone Stays Patient And doesnt Back Out Cause Of The Wait.... Were Very Close

timberwoof · 04-09-2008, 08:44 PM

Hurry up damn it...

alerored04 · 04-09-2008, 10:27 PM

My thoughts exactly.

AeR0 · 04-09-2008, 11:03 PM

Quote:

Originally Posted by alerored04

What else should i be doing?

i think your doing a good job thanks man!

i was going to do it but i just dont have the time and patience either so alot of credit out to you!

timberwoof · 04-10-2008, 10:59 AM

Alerored04 - you are doing a good job, its just wait and see time. Just keep in touch with the other forums and keep reminding people how many more we need. Somebody is bound to change their mind, and join in.

surreal_awakeni · 04-10-2008, 11:25 AM

Not only are stimulus checks coming, a stimulus check for a single individual will buy you not one, but TWO sets of sway bars

alerored04 · 04-13-2008, 05:03 PM

Bumpity.

timberwoof · 04-13-2008, 05:37 PM

no more add ons? This sucks. Its like playing "Just the tip" with Eva Longoria. Teaser....

alerored04 · 04-13-2008, 06:29 PM

This money is burning a hole in my pocket! Come on people, help me spend it!

HaVoK~DOGZ~ · 04-13-2008, 11:29 PM

Me Too

PhantomLover007 · 04-14-2008, 12:47 AM

Quote:

Originally Posted by timberwoof

no more add ons? This sucks. Its like playing "Just the tip" with Eva Longoria. Teaser....

I wouldn't even care if I got "just the tip" from her. It would be all over in a minute or two anyways...

Now back to the previously scheduled program....

04-08-2008, 08:09 PM	#101
Hodge Chrome Wheel Lover AKA: CK Join Date: Jun 2004 Location: Michigan Age: 33 Posts: 1,496 Vehicle: 2000 Grand Am Se	i think i might be interested in both.. its $300 total with shipping or what is the final costs, thats what i need to know before i commit __________________ 2000 Grand Am SE

04-08-2008, 10:11 PM	#104
alerored04 GAGT - Member AKA: Matt Join Date: Apr 2006 Location: New Prague, MN Age: 35 Posts: 702 Vehicle: 2001 Oldmobile Alero	Thanks Rich. We need to fill 20 fronts and 20 rears before they will take our order, so once we are full then it will move forward. Until that day we sit where we are. __________________ Lots of mods cost lots of $$ http://www.cardomain.com/ride/2598719/1

04-09-2008, 08:36 PM	#110
HaVoK~DOGZ~ GAGT - Member Join Date: Aug 2002 Location: POMONA-TOWN CA Age: 37 Posts: 411 Vehicle: 2000 Grand Am GT Coupe	I Just Hope Everyone Stays Patient And doesnt Back Out Cause Of The Wait.... Were Very Close __________________ 40 series Flowmaster, TOG headers, Catco High-flow cat, DoctorSpeed Stg.3 CAI, Intrax Springs,

04-09-2008, 08:44 PM	#111
timberwoof Law Dawg AKA: Cody Join Date: Jul 2006 Location: Portland Tx Posts: 1,827 Vehicle: 2004 Grand Am SE1	Hurry up damn it... __________________ Mods: Sways, F-STB, Dr. Speed Stage 2 w/ box, Rear Disk Conversion, drilled rotors, steel braided lines, 180* T-Stat.

04-09-2008, 10:27 PM	#112
alerored04 GAGT - Member AKA: Matt Join Date: Apr 2006 Location: New Prague, MN Age: 35 Posts: 702 Vehicle: 2001 Oldmobile Alero	My thoughts exactly. __________________ Lots of mods cost lots of $$ http://www.cardomain.com/ride/2598719/1

04-08-2008, 08:44 PM	#102
GrandAmC9 GAGT - Member AKA: Steve Join Date: Feb 2007 Location: Maynard MA Age: 31 Posts: 380 Vehicle: 2000 Grand Am GT1	depending on when this is gunna happen im in for front and rear

04-08-2008, 10:54 PM	#106
surreal_awakeni GAGT - Member AKA: Matt Join Date: Mar 2008 Location: Crofton, MD Age: 44 Posts: 161 Vehicle: 1999 Olds Alero Coupe	We need good, strong committed buyers. We're close here, peeps. Just a few more definite orders and we'll be all set.

04-09-2008, 06:10 AM	#108
surreal_awakeni GAGT - Member AKA: Matt Join Date: Mar 2008 Location: Crofton, MD Age: 44 Posts: 161 Vehicle: 1999 Olds Alero Coupe	Just think, economic stimulus checks come in May. What better way to stimulate the economy? Buy now, people! You'll get the money back in a month!!!

04-10-2008, 10:59 AM	#114
timberwoof Law Dawg AKA: Cody Join Date: Jul 2006 Location: Portland Tx Posts: 1,827 Vehicle: 2004 Grand Am SE1	Alerored04 - you are doing a good job, its just wait and see time. Just keep in touch with the other forums and keep reminding people how many more we need. Somebody is bound to change their mind, and join in. __________________ Mods: Sways, F-STB, Dr. Speed Stage 2 w/ box, Rear Disk Conversion, drilled rotors, steel braided lines, 180* T-Stat.

04-10-2008, 11:25 AM	#115
surreal_awakeni GAGT - Member AKA: Matt Join Date: Mar 2008 Location: Crofton, MD Age: 44 Posts: 161 Vehicle: 1999 Olds Alero Coupe	Not only are stimulus checks coming, a stimulus check for a single individual will buy you not one, but TWO sets of sway bars

04-13-2008, 05:03 PM	#116
alerored04 GAGT - Member AKA: Matt Join Date: Apr 2006 Location: New Prague, MN Age: 35 Posts: 702 Vehicle: 2001 Oldmobile Alero	Bumpity. __________________ Lots of mods cost lots of $$ http://www.cardomain.com/ride/2598719/1

04-13-2008, 05:37 PM	#117
timberwoof Law Dawg AKA: Cody Join Date: Jul 2006 Location: Portland Tx Posts: 1,827 Vehicle: 2004 Grand Am SE1	no more add ons? This sucks. Its like playing "Just the tip" with Eva Longoria. Teaser.... __________________ Mods: Sways, F-STB, Dr. Speed Stage 2 w/ box, Rear Disk Conversion, drilled rotors, steel braided lines, 180* T-Stat.

04-13-2008, 06:29 PM	#118
alerored04 GAGT - Member AKA: Matt Join Date: Apr 2006 Location: New Prague, MN Age: 35 Posts: 702 Vehicle: 2001 Oldmobile Alero	This money is burning a hole in my pocket! Come on people, help me spend it! __________________ Lots of mods cost lots of $$ http://www.cardomain.com/ride/2598719/1

04-13-2008, 11:29 PM	#119
HaVoK~DOGZ~ GAGT - Member Join Date: Aug 2002 Location: POMONA-TOWN CA Age: 37 Posts: 411 Vehicle: 2000 Grand Am GT Coupe	Me Too __________________ 40 series Flowmaster, TOG headers, Catco High-flow cat, DoctorSpeed Stg.3 CAI, Intrax Springs,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode