GrandAmGT.com Forum
http://www.pfyc.com GrandAmGT.com Premium Memership Signup
CustomCarGrills.com   

Go Back   GrandAmGT.com Forum > GAGT - Technical - Sponsored by www.MilzyMotorSports.com > Technical Q&A

Reply
 
Thread Tools Display Modes
Old 04-13-2017, 12:03 PM   #1
bsm123
GAGT - Newbie
 
AKA: Barry
Join Date: Mar 2017
Location: regina sk
Posts: 1
Vehicle: 2000 grand am GT coupe
bsm123 Gettin' there
control arm-sport suspension

Have a 2000 Grand Am Gt. According to VIN has sport suspension. Want to put in 2 new control arms (front lower) complete with ball joints and bushings. ACDelco-45D333 and Moog-CK80446 only show control arms for this vehicle as non sport suspension. When I call them direct they tell me they do not have anything for the sport suspension. When I search GM parts it only shows part #15216919 which is the control arm that fits both the non sport and sport suspensions. Anyone have any thoughts or experience whether these will fit in the sport suspension and what difference may be?
Have seen cheaper alternatives showing will fit sport suspension but have a preference for Moog or ACDelco.

Last edited by bsm123; 04-13-2017 at 12:17 PM.
bsm123 is offline   Reply With Quote
Old 04-13-2017, 01:21 PM   #2
tw0123
osv in progress
 
tw0123's Avatar
 
AKA: Tim
Join Date: Mar 2011
Location: Lindsay, Ontario
Posts: 430
Vehicle: 2002 Alero
tw0123 Gettin' there
As far as i know, 99 offered aluminum control arms then in mid 2000 they switched to a stamped steel control arm... The only difference in suspension components that I'm aware of were slightly different sway bars and spring rates but the rest was the same parts...

If you're looking for an actual upgrade, you could find a set of the 99 aluminum arms in a junk yard then order a set of the poly bushings...
tw0123 is offline   Reply With Quote
Old 04-23-2017, 10:20 AM   #3
AaronGTR
BlingWithBallz
 
AaronGTR's Avatar
 
AKA: Aaron
Join Date: Aug 2002
Location: Detroit area, MI
Age: 39
Posts: 12,191
Vehicle: 2000 Grand Am GT1 2dr
AaronGTR has made plenty of valid pointsAaronGTR has made plenty of valid points
There is no difference in the control arms on any of the suspension RPO's for these cars. Other than the switch from aluminum to steel in 2000, the bushings and ball joints are exactly the same. The springs and struts were all the same too (exact same part numbers on all cars). The only difference was between the V6 and the 4 cylinder cars. Basically if you got the V6 (in SE or GT) you got the FE3 sport suspension that came with stiffer sway bars and standard 16" wheels and tires.
__________________
The few, the proud, the boosted!
13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011)
See it here. the total package.
AaronGTR is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:24 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com
CustomCarGrills.com