2000 Pontiac Grand AM GT Dash Repair Curving

George · 05-01-2017, 06:17 PM

Hello
I have a 2000 Pontiac Grand AM GT 4 door that has the dash board curving up at the windshield as well at the Bezel that is in front of the instrument cluster.
I have seen the video and the rubber tubing repair trick for the dash at the wind shield BUT how do you repair the dash that has curved up at the top of the Bezel above the instruments so that it fits back into the Bezel covering it?

Videos are BEST if you can point me to.

Thanks in advance for your help.
George

Madness10 · 05-02-2017, 07:06 AM

Some people has tried to heat it up, put some high strength glue on it and use a clamp to hold it together, but will ultimately go back the same way again. There is no permanent solution to our dash curling.

2000 GT · 05-03-2017, 08:05 AM

I wonder if you could screw it in someplace. May have to remove some of that dash foam material.

louisville · 05-11-2017, 05:49 AM

Go to your local auto parts store and buy 5 ft of hose . 3/4 inch is perfect. Cut ends to a 45 degree angle and push into place/ the windshield and dash will hold it in place. Almost looks like it is supposed to be there. It will hold dash down and with the summer heat , it will mold it back into place ! Worked for me !

05-01-2017, 06:17 PM	#1
George GAGT - Newbie AKA: George Join Date: Apr 2017 Location: Hamilton, Ontario Posts: 1 Vehicle: 2000 Grand AM GT	2000 Pontiac Grand AM GT Dash Repair Curving Hello I have a 2000 Pontiac Grand AM GT 4 door that has the dash board curving up at the windshield as well at the Bezel that is in front of the instrument cluster. I have seen the video and the rubber tubing repair trick for the dash at the wind shield BUT how do you repair the dash that has curved up at the top of the Bezel above the instruments so that it fits back into the Bezel covering it? Videos are BEST if you can point me to. Thanks in advance for your help. George

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-02-2017, 07:06 AM	#2
Madness10 GAGT - Member AKA: Matthew Join Date: Nov 2014 Location: Fontana,Calif Age: 50 Posts: 94 Vehicle: 2003 Grand Am SE1	Some people has tried to heat it up, put some high strength glue on it and use a clamp to hold it together, but will ultimately go back the same way again. There is no permanent solution to our dash curling.

05-03-2017, 08:05 AM	#3
2000 GT GAGT - Member AKA: Nate Join Date: Sep 2005 Location: Gurnee, IL Age: 37 Posts: 68 Vehicle: 2000 Grand Am GT 3.4L	I wonder if you could screw it in someplace. May have to remove some of that dash foam material.

05-11-2017, 05:49 AM	#4
louisville GA Addict AKA: jimmie Join Date: Nov 2008 Location: Clarksville In Posts: 112 Vehicle: 2000 Grand Am GT	Go to your local auto parts store and buy 5 ft of hose . 3/4 inch is perfect. Cut ends to a 45 degree angle and push into place/ the windshield and dash will hold it in place. Almost looks like it is supposed to be there. It will hold dash down and with the summer heat , it will mold it back into place ! Worked for me !