|
|
|
09-23-2012, 06:31 PM
|
#1 |
|
GAGT - Newbie
AKA: Bill
Join Date: Sep 2012
Location: Madison Indiana
Posts: 3
Vehicle: 2000 grand am se 2.4L
 |
HELP! 2000 grand am missing EGR valve and whatever it attaches to
I have a 2000 grand am SE 2.4L. It has a very rough idle. i have already had the plugs replaced along with the ignition adapter and the plug boots. i pulled out the IAC and it was BLACK. carbed up completly. i cleaned it up and thought about the EGR valve being carbed up. so i removed the air intake from the throttle body to get to the EGR valve. but when i got to where the EGR should be there was nothing there. i did some more research and whatever the EGR valve mounts to is missing as well. all that was there was a gunked up area and a hole into the motor. see image below. the picture was taken after i cleaned the surface. Can anyone tell me what part im missing that the EGR was attached to and could this have caused damage to my engine? What do i do now?
Please help and thanks in advance |
|
|
|
09-23-2012, 06:35 PM
|
#2 |
|
Manic Mechanic
 
AKA: albert
Join Date: Dec 2010
Location: cumberland md
Age: 56
Posts: 677
Vehicle: 2003 grand am gt
  |
i answered your other post
__________________
Building my own concept |
|
|
|
 |
| Tags |
| 2.4l, grand am, missing egr |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
