2 different axles??

sugar ray · 03-10-2023, 05:02 PM

Quiet board these days as more and more GAs die off
Does anyone know if 2 different style axles were made for an 02 SE??
Im in the midst of a tranny swap 3.4. My stock tranny had the one size fits all axles. The axles have the female ends so the axle will fit either left or right side as they are identical lengths. The Donor tranny has one side thats a match but the passenger side needs an axle with a male splined end?
I didnt think they made 2 different ones for these?

sugar ray · 03-10-2023, 09:51 PM

I got R figured out!! The inner stub shaft as its known. Removed the C-clip and Some random tiny puller I had in my tool kit pulled the shaft right out. Stub shaft now goes into the good trans and re-assembly commences

03-10-2023, 05:02 PM	#1
sugar ray GAGT - Member AKA: Sean Join Date: Jun 2008 Location: Canada Posts: 233 Vehicle: 2002 Grand Am	2 different axles?? Quiet board these days as more and more GAs die off Does anyone know if 2 different style axles were made for an 02 SE?? Im in the midst of a tranny swap 3.4. My stock tranny had the one size fits all axles. The axles have the female ends so the axle will fit either left or right side as they are identical lengths. The Donor tranny has one side thats a match but the passenger side needs an axle with a male splined end? I didnt think they made 2 different ones for these? Attached Thumbnails Last edited by sugar ray; 03-10-2023 at 09:54 PM.

03-10-2023, 09:51 PM	#2
sugar ray GAGT - Member AKA: Sean Join Date: Jun 2008 Location: Canada Posts: 233 Vehicle: 2002 Grand Am	I got R figured out!! The inner stub shaft as its known. Removed the C-clip and Some random tiny puller I had in my tool kit pulled the shaft right out. Stub shaft now goes into the good trans and re-assembly commences Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode