another supercharger kit - Page 5

Kai · 10-10-2003, 11:54 AM

All of you are in for a surprise... *evil grin* dun worry john...i aint gonna spill anything....yet

Spaz...i'm comin for ya =P

Kai

PontiacGT2K · 10-10-2003, 12:12 PM

Quote:

Originally posted by Kai
All of you are in for a surprise... *evil grin* dun worry john...i aint gonna spill anything....yet

Spaz...i'm comin for ya =P

Kai

Most of us already know everything about it

KpazzH0ly · 10-10-2003, 02:20 PM

aleroboy · 10-10-2003, 08:46 PM

Quote:

Originally posted by PontiacGT2K
Most of us already know everything about it

just not the really good info.
but the project has launched

SikMindz · 10-10-2003, 08:59 PM

Sounds good...any hints?

And then now that you started ordering parts what's the final ETA on the project?

Schweppe23 · 10-11-2003, 12:03 AM

Switching to a larger sc will take more power to drive it...right? How much hp does the m62 draw and how does that compare to an m90 or equiv. Thanks.

Pat Lavanty

aleroboy · 10-11-2003, 01:58 AM

the sc I'm using is more effecient so the extra drive power will be minimal
also because I dont have to spin it as fast to produce the power I want it could actually be less draw.
unfortunately the info on this SC is not very clear and I doubt I'll do my own testing to see what it does and draws.

the unit I'm using is a touch larger than an M90 and should have no trouble getting me to 400 hp with almost the same boost I had before

AMRAAM4 · 10-11-2003, 08:32 AM

will this sit in amanner that someone will be able to keep there hood as is? If the M90 was used there is good inclination that it would hit the hood and a cowl would have to be made.

PontiacGT2K · 10-11-2003, 08:47 AM

Quote:

Originally posted by AMRAAM4
will this sit in amanner that someone will be able to keep there hood as is? If the M90 was used there is good inclination that it would hit the hood and a cowl would have to be made.

It's not the M90, it's a supercharger by a different manufacturer that is a little bigger than the M90.

And no need for a new hood or what not, hood clearance will be similar to that of the M62.

AMRAAM4 · 10-11-2003, 08:54 AM

I know it's not the M90! But he said it is a tad larger than the M90, that's why I asked.

aleroboy · 10-11-2003, 11:53 AM

the displacemnt is larger than an M90 but physical size is about the same if not alittle smaller
its an inch wider than the 62 so it will have to be dropped about a half inch down to maintain the same height of the 62.
since I'm building all my own mounts, inlet, and outlet this will not be a problem.
it will fit under the hood, but the battery may have to go to the trunk.

KpazzH0ly · 10-11-2003, 04:12 PM

CANT WAIT

CruzinGT33 · 10-20-2003, 08:31 PM

I'm getting giddy..... hehehe.... *smiles ear 2 ear*
I'm filling the piggy bank as I speak.....

10-21-2003, 02:29 PM

any new news?

PontiacGT2K · 10-21-2003, 02:34 PM

http://www.grandamgt.com/forum/showt...threadid=23534

aleroboy · 10-21-2003, 03:09 PM

Well the sc is taking longer than expected to arrive
its back ordered directly from whipple.
jus tmy luck... gotta wait for everything

on another note some of the parts are scheduled to be delivered today. just waiting for ups to get here.

aleroboy · 10-23-2003, 10:40 PM

great news!!!!
it shipped wednesday!!!
fedex ground
estimated delivery is monday!!!
I'm soo excited

the maft+, 3.5" maf ends and MSD dis 4 all arrived allready
just waiting on the SC and bypass valve!!!

bszopi · 10-24-2003, 07:43 AM

Glad to hear you got the DIS-4...

Schweppe23 · 10-24-2003, 07:59 AM

Nice to see everything coming along. I can't wait to hear the results. Keep us posted

09-30-2003, 07:39 PM	#81
KpazzH0ly GAGT - Member AKA: Paul Join Date: Mar 2003 Location: Round Lake hts Il Age: 37 Posts: 676 Vehicle: 2000 Grand AM GT Coupe	__________________ 3400 top end for sale : Heads and manifolds for 200 + shipping. PM if interested. tejohnson's #2 fan! SpyhunteR's #2 fan! Toyota certified Tech. (about time)

10-10-2003, 11:54 AM	#82
Kai Black -n- Yellow Join Date: Sep 2002 Location: Memphis,Tn Age: 39 Posts: 34 Vehicle: 99 GAGT Coupe	All of you are in for a surprise... evil grin dun worry john...i aint gonna spill anything....yet Spaz...i'm comin for ya =P Kai __________________ Back and Runnin' again

10-10-2003, 02:20 PM	#84
KpazzH0ly GAGT - Member AKA: Paul Join Date: Mar 2003 Location: Round Lake hts Il Age: 37 Posts: 676 Vehicle: 2000 Grand AM GT Coupe	__________________ 3400 top end for sale : Heads and manifolds for 200 + shipping. PM if interested. tejohnson's #2 fan! SpyhunteR's #2 fan! Toyota certified Tech. (about time)

10-11-2003, 12:03 AM	#87
Schweppe23 GAGT - Senior Member Join Date: Sep 2002 Location: Ohio Age: 41 Posts: 1,549 Vehicle: Pontiac	Switching to a larger sc will take more power to drive it...right? How much hp does the m62 draw and how does that compare to an m90 or equiv. Thanks. Pat Lavanty __________________ First 99+ GAGT to run 14s First E/M (only) GA to run 13s First turbo'D GAGT to run 12s 11's coming soon

10-11-2003, 01:58 AM	#88
aleroboy 340+ hp Club Member Join Date: Aug 2002 Location: Colorado springs Age: 39 Posts: 1,854 Vehicle: 2001 Alero GLS coupe	the sc I'm using is more effecient so the extra drive power will be minimal also because I dont have to spin it as fast to produce the power I want it could actually be less draw. unfortunately the info on this SC is not very clear and I doubt I'll do my own testing to see what it does and draws. the unit I'm using is a touch larger than an M90 and should have no trouble getting me to 400 hp with almost the same boost I had before __________________ really really slow right now. Last edited by aleroboy; 10-11-2003 at 02:01 AM.

10-11-2003, 08:32 AM	#89
AMRAAM4 Wiley 'Ol Veteran AKA: Bob (aka Hoss) Join Date: Aug 2002 Location: Azerbaijan Age: 45 Posts: 6,935 Vehicle: See My Signature Block	will this sit in amanner that someone will be able to keep there hood as is? If the M90 was used there is good inclination that it would hit the hood and a cowl would have to be made. __________________ 2016 GoMango Challenger SRT Hellcat 2014 Redline Pearl Jeep Grand Cherokee SRT 2018 Bruiser Grey Dodge Durango SRT TRADED-2004 Black Grand Am GT,2004 Impulse Blue GTO M6, 2012 Mineral Gray Jeep SRT8, 2010 Bright Silver Jeep SRT8 LEASE TURN-IN-2006 Summit White TrailBlazer SS AWD (Vector CAI & tune) SOLD-2000 Silvermist Grand Am GT Supercharged,1994 Daytona Blue Single Turbo RX7 (427whp/330wtq), 2006 Spice Red GTO A4, 2013 Grabber Blue Shelby GT500

10-11-2003, 08:54 AM	#91
AMRAAM4 Wiley 'Ol Veteran AKA: Bob (aka Hoss) Join Date: Aug 2002 Location: Azerbaijan Age: 45 Posts: 6,935 Vehicle: See My Signature Block	I know it's not the M90! But he said it is a tad larger than the M90, that's why I asked. __________________ 2016 GoMango Challenger SRT Hellcat 2014 Redline Pearl Jeep Grand Cherokee SRT 2018 Bruiser Grey Dodge Durango SRT TRADED-2004 Black Grand Am GT,2004 Impulse Blue GTO M6, 2012 Mineral Gray Jeep SRT8, 2010 Bright Silver Jeep SRT8 LEASE TURN-IN-2006 Summit White TrailBlazer SS AWD (Vector CAI & tune) SOLD-2000 Silvermist Grand Am GT Supercharged,1994 Daytona Blue Single Turbo RX7 (427whp/330wtq), 2006 Spice Red GTO A4, 2013 Grabber Blue Shelby GT500

10-11-2003, 11:53 AM	#92
aleroboy 340+ hp Club Member Join Date: Aug 2002 Location: Colorado springs Age: 39 Posts: 1,854 Vehicle: 2001 Alero GLS coupe	the displacemnt is larger than an M90 but physical size is about the same if not alittle smaller its an inch wider than the 62 so it will have to be dropped about a half inch down to maintain the same height of the 62. since I'm building all my own mounts, inlet, and outlet this will not be a problem. it will fit under the hood, but the battery may have to go to the trunk. __________________ really really slow right now.

10-11-2003, 04:12 PM	#93
KpazzH0ly GAGT - Member AKA: Paul Join Date: Mar 2003 Location: Round Lake hts Il Age: 37 Posts: 676 Vehicle: 2000 Grand AM GT Coupe	CANT WAIT __________________ 3400 top end for sale : Heads and manifolds for 200 + shipping. PM if interested. tejohnson's #2 fan! SpyhunteR's #2 fan! Toyota certified Tech. (about time)

10-20-2003, 08:31 PM	#94
CruzinGT33 JustinX AKA: Justin Join Date: Aug 2003 Location: Southern Illinois Age: 37 Posts: 738 Vehicle: '01 GAGT Silver Coupe	I'm getting giddy..... hehehe.... smiles ear 2 ear I'm filling the piggy bank as I speak..... __________________ Going to the Dark side, '05-'06 Tibby... i know, I know. My Cardomain Page "What?!?" "Oh, I hope noone **** on my coat!!"

10-21-2003, 02:29 PM	#95
TurbodreamsGT Guest Posts: n/a	any new news?

10-21-2003, 02:34 PM	#96
PontiacGT2K It's coming... AKA: Andy Join Date: Sep 2002 Location: St. Charles, Illinois / Milwaukee, Wisconsin (school) Age: 37 Posts: 2,486 Vehicle: '03 350z Touring	http://www.grandamgt.com/forum/showt...threadid=23534 __________________ Team GMCI "Get the ambulance, my stomach fell out."

10-21-2003, 03:09 PM	#97
aleroboy 340+ hp Club Member Join Date: Aug 2002 Location: Colorado springs Age: 39 Posts: 1,854 Vehicle: 2001 Alero GLS coupe	Well the sc is taking longer than expected to arrive its back ordered directly from whipple. jus tmy luck... gotta wait for everything on another note some of the parts are scheduled to be delivered today. just waiting for ups to get here. __________________ really really slow right now.

10-23-2003, 10:40 PM	#98
aleroboy 340+ hp Club Member Join Date: Aug 2002 Location: Colorado springs Age: 39 Posts: 1,854 Vehicle: 2001 Alero GLS coupe	great news!!!! it shipped wednesday!!! fedex ground estimated delivery is monday!!! I'm soo excited the maft+, 3.5" maf ends and MSD dis 4 all arrived allready just waiting on the SC and bypass valve!!! __________________ really really slow right now.

10-24-2003, 07:43 AM	#99
bszopi User account under probation AKA: Brad Join Date: Aug 2002 Location: Rogers, AR Age: 46 Posts: 1,391 Vehicle: 1989 Ford Mustang	Glad to hear you got the DIS-4...

10-24-2003, 07:59 AM	#100
Schweppe23 GAGT - Senior Member Join Date: Sep 2002 Location: Ohio Age: 41 Posts: 1,549 Vehicle: Pontiac	Nice to see everything coming along. I can't wait to hear the results. Keep us posted __________________ First 99+ GAGT to run 14s First E/M (only) GA to run 13s First turbo'D GAGT to run 12s 11's coming soon