GrandAmGT.com Forum
http://www.pfyc.com GrandAmGT.com Premium Memership Signup
CustomCarGrills.com   

Go Back   GrandAmGT.com Forum > GAGT - Technical - Sponsored by www.MilzyMotorSports.com > Warranty, TSB and Recall Info

Reply
 
Thread Tools Display Modes
Old 11-12-2003, 05:12 PM   #1
iceman
woop woop
 
iceman's Avatar
 
AKA: Seth
Join Date: Aug 2002
Location: Cherry Hill, NJ
Age: 39
Posts: 10,528
Vehicle: 97 Blazer - 84 Fiero
iceman has disabled reputation
Send a message via AIM to iceman Send a message via Yahoo to iceman
Engine Oil or Coolant Leak (Install New Intake Manifold Gasket) #03-06-01-010B

Engine Oil or Coolant Leak (Install New Intake Manifold Gasket) #03-06-01-010B - (10/24/2003)
Engine Oil or Coolant Leak (Install New Intake Manifold Gasket)

2000-2003 Buick Century

2002-2003 Buick Rendezvous

1996 Chevrolet Lumina APV

1997-2003 Chevrolet Venture

1999-2001 Chevrolet Lumina

1999-2003 Chevrolet Malibu, Monte Carlo

2000-2003 Chevrolet Impala

1996-2003 Oldsmobile Silhouette

1999 Oldsmobile Cutlass

1999-2003 Oldsmobile Alero

1996-1999 Pontiac Trans Sport

1999-2003 Pontiac Grand Am, Montana

2000-2003 Pontiac Grand Prix

2001-2003 Pontiac Aztek

with 3.1L or 3.4L V-6 Engine (VINs J, E - RPOs LG8, LA1)

This bulletin is being revised to change the model Information. Please discard Corporate Bulletin Number 03-06-01-010A (Section 06 - Engine).
Condition

Some owners may comment on an apparent oil or coolant leak. Additionally, the comments may range from spots on the driveway to having to add fluids.
Cause

Intake manifold may be leaking allowing coolant, oil or both to leak from the engine.
Correction

Install a new design intake manifold gasket. The material used in the gasket has been changed in order to improve the sealing qualities of the gasket. When replacing the gasket, the intake manifold bolts must also be replaced and torqued to a revised specification. The new bolts will come with a pre-applied threadlocker on them.

Object Number: 190523 Size: SH
Click here for detailed picture of above image.

Notice

An oil leak may result if the vertical bolts are not tightened before the diagonal bolts.

Diagonal bolts may require a crows foot to tighten.
Tighten

1. Tighten the vertical lower intake manifold bolts (1) to 7Nm (62 lb in).
2. Tighten the diagonal lower intake manifold bolts (2) to 7Nm(62 lb in).
3. Tighten the vertical lower intake manifold bolts (1) to 13Nm(115 lb in).
4. Tighten the diagonal lower intake manifold bolts (2) to 25Nm(18 lb ft).

Parts Information

Part Number

Description

Qty

89017279

Intake manifold Gasket

1

11588915

Intake manifold bolt - short

4

11588914

Intake manifold bolt - long

4
iceman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:58 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com
CustomCarGrills.com