carbon fiber dash kit

[mr_eh]

the more peices you send them the cheaper it is? ... so if i drive my car to syracuse... freebie? or what..

[Vintalage]

PACE is supposedly bidding on this bezel so if he gets it, hopefully he'll take more pics of it showing the detail.

I'm down for this. This would look great.

[cavingman]

think i just figured out how to do this myself

[botlfed]

Originally posted by PACE
Oh its that water imprint process described on their stie? Cool. I wonder what the reserve is.....

Anyone feel free to bid like $200 to see what the reserve is and then retract your bid......<---great way to see what reserve people have on stuff

Reserve is $40.00 thank me

[PACE]

^ Gracias !

OK. Is anyone interested in a group buy?? We could send in our interior parts - he could CF them and send them back. 4 days is a pretty quick turn around.... I want to see how the radio bezel looks first tho.....

Hey Panecea / McLeod WHY ARE YOU OUT BIDDING ME YOU BUTTHOLE???? PM SENT.

[PACE]

OK. I sent him an e-mail about a possible group buy. We'll see what he says...hopefully it will be cheap!

I bet C/F door sills would look cool....and the plastic OEM mouse-ear mirrors could be C/F'ed as well !

[GTManiac]

Originally posted by botlfed
Reserve is $40.00 thank me

LMAO

thank you. $40.00 is NOT bad at all considering you get the piece too.

[mr_eh]

you sending him an email for a group buy makes me seem selfish for asking for a discount if i bring the entire car there =P

[PACE]

FOCK. Outbid again by some dumb bitch......

[mr_eh]

wait till theres 2 seconds left, im gonna tom berringer it... (sniper) sigh, you people dont get anything...

[cavingchick]

Originally posted by PACE
FOCK. Outbid again by some dumb bitch......

lets try this again....damn work computer

anyway...dumb bitch eh...

[PACE]

Lets not have some long drawn out bidding war....Just let me get it. I will then post good pics of it and organize a group buy for EVERYONE and it will be cheaper than you are going to get it for off e-bay......!

[Kdawg207]

with 4 days left...you guys are gonna push this thing over a hundred...

[PACE]

Naw...Im not going to bid until last minute unless it gets really high....

And sorry for the dum bitch comment....didn't know it was a member of this site

[Vintalage]

Hopefully, it doesn't go high. Pace was the first to bid on it.

Wait a minute...why is Panacea bidding on it when it only fits '01+??? He's got a 1999.

[PACE]

simple mistake

[botlfed]

Originally posted by PACE


OK. Is anyone interested in a group buy?? We could send in our interior parts - he could CF them and send them back. 4 days is a pretty quick turn around.... I want to see how the radio bezel looks first tho.....

I'd be interested

[Panacea]

Hahah, I bid on it not reading the whole thread first... I tried to retract my bid last night, but I woke up this morning to see someone had outbid me. Sorry guys.

[GTManiac]

this guy has got to be sitting here thinking "WTF mate?" when he sees all of this action from his auction and the emails we're sending him. I hope he gets back to you on the GB thing. It'd be hella sweet for people to get CF done like that on their interiors.

[n43210]

ne1 email him about getting ne thing done? he quoted me 115 with shipping back to me for chromeing the radio trim after my mod to it. i was told the more pieced i send in the cheaper each pieces gets. ill probably be sending 25 to 30 pieces to him. i also sent him a button that way i could see what his final product looks like. i think he is swammped with email though cause beofre he would get back to me in 20 minutes or less. its takes forever now.

[Panacea]

Yeah, this is the same thing GM is supposed to be doing, but since it takes them forever to pull sh!t out their asses, we will go elsewhere. It'd be hilarious if everyone bought from this guy, then GM comes out with theirs and gets no sales... Focking idiots!

[GTManiac]

Originally posted by n43210
ne1 email him about getting ne thing done? he quoted me 115 with shipping back to me for chromeing the radio trim after my mod to it. i was told the more pieced i send in the cheaper each pieces gets. ill probably be sending 25 to 30 pieces to him. i also sent him a button that way i could see what his final product looks like. i think he is swammped with email though cause beofre he would get back to me in 20 minutes or less. its takes forever now.

yep... I posted my email back on page 1 (on my viewing.)

[mr_eh]

i sent them an email and got a quick response, waiting for a price quote and some other coughthingscough these guys seem really quality tho... i dig em allready

[cavingman]

eh, CF those bling blangin rims dawg

[mr_eh]

*raises eyebrow*
that would be funny, why do you have to tempt me? why?

[cavingman]

CF your windshield. or camo the whole car. no one could find you!

[mr_eh]

license plate = "Incognito" ?
should i get that see thru vinyl that pick ups trucks have on their window and put that across the windows?

green and black works and i'll show you guys...

[Panacea]

I wonder if this is the same process that they use to camouflage guns. If so it's pretty interesting process. They put the film or whatever in the water or solution, then dip the object in it and when they pull it out it's camo'd... I bet it's the same thing...

Cool stuff.

[yoda]

Yup, That's it. Same process.

[cavingman]

Originally posted by Panacea
I wonder if this is the same process that they use to camouflage guns. If so it's pretty interesting process. They put the film or whatever in the water or solution, then dip the object in it and when they pull it out it's camo'd... I bet it's the same thing...

Cool stuff.

yea your right, ive been researching it the last day or so. cant find much info on where to get the products though.

[el gordo loco]

here's the response I got to my email:
From : Steve <joshua1219@a-znet.com>
Sent : Wednesday, February 11, 2004 6:53 PM
To : <elgordoloco@hotmail.com>
Subject : Re: Question for seller -- Item #2459314332

Hi, I am sorry if there is any confusion with the piece. We can take any
pieces that you would like and carbon fiber them. If you like you can
see
our web site (www.ultra-graphics.net) Thank You. Steve.
----- Original Message -----
From: <elgordoloco@hotmail.com>
To: <joshua1219@a-znet.com>
Sent: Tuesday, February 10, 2004 9:56 PM
Subject: Question for seller -- Item #2459314332


> Nice piece! I'm sure I'm not alone when saying that there's a genuine
interest for this item in the Grand Am community. You have the item
labeled
as a 99+ piece, however judging by the pictures this appears to be a
double
din opening. If this is true, it would make it a direct fit for only the
01+
model Grand Am(s). With minor modifications the 99-00 Grand Am owners
could
use this as well. Is the there a 1 1/2 version of this same item for the
99-00 Grand Am(s)? If not would it be considered? If so, potential buyer
buyers could be found at www.grandamgt.com and also at
www.gaownersclub.com.
Would group buys be considered? We anxiously await a reply.

[el gordo loco]

Cavingman, I'm not sure if you've come across these yet but here are some possible links to materials:

http://www.xfinishes.com/pattern.shtml

not sure about this one but here it is:

http://futurefiber.tripod.com/produc...onfiber_e.html

I can't seem to find the adhesives.

[PACE]

Hi Jason, I'm glad to see you are interested with our process . I know you
will be happy with the look and quality of the piece. I would like to give
you a little more info. Our company name is Ultra Graphics
(www.ultra-graphics.net), we are located in Syracuse, New York. The process
we are doing can take any product be it plastic,metal,glass,aluminum,or
stone and put a thin carbon fiber graphic film over the top of it. The
carbon fiber film is then clear coated with a high solids clear to give it
both durability and shine. The proces is guaranteed for the life of the
part. The best thing is that the process is done on factory pieces so there
is never any problem with fit or finish. This is not a vinyl decal and it is
not a stick on product. Our process is actually fused to the part. We can
definitely give you a sizeable price break for the more people you get. Much
of our pricing is done by the quantity of pieces done at a given time. We
can do pieces up to 3 feet long by 2 feet wide. There are not many pieces we
cannot do. Remember we can do things like; ext. mouldings,wiper arms,ext.
door handles, mirrors,headlights and tailights (we leave cutouts for light
per your design) If you would like to give me a call you can. Thanks again
for your interest. Steven Farrell 1-315-479-7305 7am-5pm EST


---------Post up if you want in on the group buy.--------

[03xGAxSE]

im in for atleast 2 or 3 parts but the cheaper the price the more stuff i can do.... it would be nice if we could get a price scale kinda thingy, like if we have 1-10 pieces it would be around "x"dollars per piece 10-20 it would be "w" dollars per piece, that would help alot then we could post up how many pieces we all want and then figure our individual totals based opon that of course it wont be totaly accurate because people will back out and so on but it could give us a guesstimate, is this possable?

[SlammedGT]

This place does the same thing, and they have carbon fiber in other colors besides basic black
http://www.exoticwooddash.com/coating.htm

[SlammedGT]

This place does it too
http://www.dashboardsplus.com/colors.htm

[cavingman]

i would do orange CF, but im changin to an all black with orange glow only scheme hopefully soon :\

[Vintalage]

Sweet. I'd like to get my steering wheel done similar to this



Maybe in carbon fiber or brushed aluminum?

This is the two tone effect i'd like to go for. Carbon fiber on the back peice of the radio trim with brushed aluminum on the front piece. If they could do that, then i'm definately in. Maybe I should photoshop it to give me an idea what it would look like.

Can't decide between black brushed aluminum or brushed aluminum. I suppose brushed aluminum would give the best contrast.

Black Brushed Aluminum


Brushed Aluminum

[SlammedGT]

i wonder how it would look if you had carbon fiber molded over the orange on the headlights, and maybe go across th top like those eyebrow covers

[cavingman]

Originally posted by SlammedGT
i wonder how it would look if you had carbon fiber molded over the orange on the headlights, and maybe go across th top like those eyebrow covers

probobly kinda funny. usually the headlight vinyl mod only looks good when it matches the paint surrounding it (eg. bumper and fender)