1-2 Shift Problems - Page 4

eric99gt · 07-02-2004, 09:13 AM

i'm wondering if that may have affected out shift solenoids....

zootelevision · 07-02-2004, 09:23 AM

Quote:

Originally Posted by killerhound

So a new set of AC plugs and wires under employee cost is 50 bucks for everything...so we'll see how that goes. Just to let everyone know, try checking out your plugs...just curious if mine were really messed up or there are others.

So did this fix the problem with your shifting from 1st to 2nd?

The more threads I read in this fourm about problems with the GA, the more I'm starting to think I should have bought a different car.

killerhound · 07-02-2004, 04:09 PM

Quote:

Originally Posted by zootelevision

So did this fix the problem with your shifting from 1st to 2nd?

The more threads I read in this fourm about problems with the GA, the more I'm starting to think I should have bought a different car.

Yeah and no. It shifts instantly in all gears now, but while it's in second it likes to surge a little bit, like it'll accelerate, then pause, accelerate, then pause. My bodykit should be at my work in a couple weeks so I'm just gonna take it there then and have em do both at once.

blckgagt · 07-02-2004, 07:13 PM

I went to the dealer and asked one of the guys there how much would it cost to get the pressure control solenoid and the guy said about a grand. Forget that. Im just gonna wait till i have enough money and buy the tranny from domestic performance. That should fix things.

iceman · 07-07-2004, 06:36 AM

Here's a few better clips..

http://www.ice8420.com/pics/displayi...lbum=45&pos=50

first one is a slow 1-2 shift.. second shows 2-3 is fine.. third another 1-2 from a stop

Blackrider · 07-07-2004, 07:33 AM

Quote:

Originally Posted by iceman

Here's a few better clips..

http://www.ice8420.com/pics/displayi...lbum=45&pos=50

first one is a slow 1-2 shift.. second shows 2-3 is fine.. third another 1-2 from a stop

EXACTLY like mine!

eric99gt · 07-07-2004, 08:55 AM

looks like mine as well.

AznGA · 07-07-2004, 09:05 AM

Does throttle position sensor have to do with this?

iceman · 07-07-2004, 10:01 AM

I doubt it, never had problems with the tps readings

Vintalage · 07-07-2004, 10:43 AM

I think mine is doing this too now that I look at your recent clip.

killerhound · 07-07-2004, 10:21 PM

Seth, it seems from the clip when the slippage is all done and it finally catches, it drops a few more RPMS before finally climbing again. Is that true? Mine is doing that, although mine doesn't slip for as long before it drops and catches again.

AznGA · 07-07-2004, 10:26 PM

Can't believe so many people are experiencing this.

iceman · 07-07-2004, 10:27 PM

yeah when it catches the RPMS drop slightly.. i guess that's expected, picking up for lost speed ??

killerhound · 07-08-2004, 04:43 AM

Yeah that could be. My kit should be in by next week so I'm taking my car back to have them do Round 2 on it. Mine isn't slipping as long as yours does, but it's annoying knowing that it is doing it.

fo44rd · 07-10-2004, 09:41 PM

Quote:

Originally Posted by blckgagt

I went to the dealer and asked one of the guys there how much would it cost to get the pressure control solenoid and the guy said about a grand. Forget that. Im just gonna wait till i have enough money and buy the tranny from domestic performance. That should fix things.

Hell you could have the whole transmission rebuilt for that. Almost.

blckgagt · 07-12-2004, 07:31 PM

yes i realize that i could just get mine rebuilt, but i plan on adding boost, so rebuilding it would be a waste of money.

iceman · 07-29-2004, 12:30 PM

I have a question... how does KR look on anyone havin these shift problems??

Blackrider · 07-29-2004, 01:02 PM

Quote:

Originally Posted by iceman

I have a question... how does KR look on anyone havin these shift problems??

Like a horses ass, 6 degrees plus before i put in the new DHP PCM. But I think the rest is exhaust/spark plug related.

I got more knock in gear that I do during a shift.

iceman · 07-29-2004, 01:12 PM

Well reason I asked is because since my KR is gone.. I don't notice the 1-2 slip as much. Maybe I haven't driven enough. I have to drive relatively far tonight, I'll do a little uhm.. road testing

Blackrider · 07-29-2004, 01:15 PM

Quote:

Originally Posted by iceman

Well reason I asked is because since my KR is gone.. I don't notice the 1-2 slip as much. Maybe I haven't driven enough. I have to drive relatively far tonight, I'll do a little uhm.. road testing

Mine did that for whole night its shifted great. I was pumped because the problem was gone, then on my way home... guess what

I sware to god that 9 out of every 10 shifts is ****ty but there is always 1 thats is perfect. its like clockwork.

07-02-2004, 09:13 AM	#61
eric99gt just go for it AKA: Eric Join Date: Sep 2002 Location: Houston, TX Age: 39 Posts: 1,505 Vehicle: 1999 Grand Am GT Sedan	i'm wondering if that may have affected out shift solenoids.... __________________ Check the rig out here. http://rankmyride.com/?page=cars/view&CID=250 Check out my Interceptor digital scan tool

07-07-2004, 06:36 AM	#65
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	Here's a few better clips.. http://www.ice8420.com/pics/displayi...lbum=45&pos=50 first one is a slow 1-2 shift.. second shows 2-3 is fine.. third another 1-2 from a stop __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

07-07-2004, 08:55 AM	#67
eric99gt just go for it AKA: Eric Join Date: Sep 2002 Location: Houston, TX Age: 39 Posts: 1,505 Vehicle: 1999 Grand Am GT Sedan	looks like mine as well. __________________ Check the rig out here. http://rankmyride.com/?page=cars/view&CID=250 Check out my Interceptor digital scan tool

07-07-2004, 10:01 AM	#69
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	I doubt it, never had problems with the tps readings __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

07-07-2004, 10:43 AM	#70
Vintalage Hey paisanos! Join Date: Aug 2002 Location: Maryland Age: 38 Posts: 5,490 Vehicle: 2002 Grand Am GT1	I think mine is doing this too now that I look at your recent clip. __________________ 2002 Grand Am GT1 Sedan - Black 7000K HID PICS [SOLD to Jscarano]

07-02-2004, 07:13 PM	#64
blckgagt ~Turbocharged~ AKA: Randy Join Date: Sep 2002 Location: Knoxville, TN Age: 37 Posts: 1,265 Vehicle: 99 GAGT, 07 Vette	I went to the dealer and asked one of the guys there how much would it cost to get the pressure control solenoid and the guy said about a grand. Forget that. Im just gonna wait till i have enough money and buy the tranny from domestic performance. That should fix things.

07-07-2004, 09:05 AM	#68
AznGA GAGT - Junkie AKA: YJ Join Date: Nov 2002 Location: Midwest Posts: 4,440 Vehicle: GAGT	Does throttle position sensor have to do with this?

07-07-2004, 10:21 PM	#71
killerhound GAGT - Member Join Date: Jul 2003 Location: Raleigh, North Carolina Age: 36 Posts: 382 Vehicle: 2000 GAGT	Seth, it seems from the clip when the slippage is all done and it finally catches, it drops a few more RPMS before finally climbing again. Is that true? Mine is doing that, although mine doesn't slip for as long before it drops and catches again. __________________ My Cardomain Site - Updated 7/26/04 2000 Black GAGT Sedan

07-07-2004, 10:26 PM	#72
AznGA GAGT - Junkie AKA: YJ Join Date: Nov 2002 Location: Midwest Posts: 4,440 Vehicle: GAGT	Can't believe so many people are experiencing this.

07-07-2004, 10:27 PM	#73
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	yeah when it catches the RPMS drop slightly.. i guess that's expected, picking up for lost speed ?? __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

07-08-2004, 04:43 AM	#74
killerhound GAGT - Member Join Date: Jul 2003 Location: Raleigh, North Carolina Age: 36 Posts: 382 Vehicle: 2000 GAGT	Yeah that could be. My kit should be in by next week so I'm taking my car back to have them do Round 2 on it. Mine isn't slipping as long as yours does, but it's annoying knowing that it is doing it. __________________ My Cardomain Site - Updated 7/26/04 2000 Black GAGT Sedan

07-12-2004, 07:31 PM	#76
blckgagt ~Turbocharged~ AKA: Randy Join Date: Sep 2002 Location: Knoxville, TN Age: 37 Posts: 1,265 Vehicle: 99 GAGT, 07 Vette	yes i realize that i could just get mine rebuilt, but i plan on adding boost, so rebuilding it would be a waste of money.

07-29-2004, 12:30 PM	#77
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	I have a question... how does KR look on anyone havin these shift problems?? __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

07-29-2004, 01:12 PM	#79
iceman woop woop AKA: Seth Join Date: Aug 2002 Location: Cherry Hill, NJ Age: 41 Posts: 10,528 Vehicle: 97 Blazer - 84 Fiero	Well reason I asked is because since my KR is gone.. I don't notice the 1-2 slip as much. Maybe I haven't driven enough. I have to drive relatively far tonight, I'll do a little uhm.. road testing __________________ --Seth Support GrandAmGT.com sponsors! My Picture Gallery \| GoneDragRacing.com Drag Racing Photos & Videos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode