3x00 cams - Page 14

kubiache · 04-20-2005, 06:35 PM

Nice site. Questions though.

"Upgraded springs" and "Even further upgraded springs." Care to be more specific?

These are NOT regrinds, right?

How much testing went into this to determine how safe they are on a stock PCM?

Specs, man. You might as well make them known now that you've released the cams. How hard is it for someone to buy a cam and steal the specs if they want anyways?

Cam install kit?

FORTEEN3GT · 04-20-2005, 06:46 PM

Quote:

Originally Posted by kubiache

Nice site. Questions though.

These are NOT regrinds, right?

Cam install kit?

Cam Motion..... not regrinds IIRC.... and yes he will sell a kit.

H.O. Driver · 04-20-2005, 06:47 PM

Um, yea...... might not have to think about this. If its any consolation his stage 2 heads netted good numbers with Buckland's Monte. It did great on the dyno, but track he's still getting used to it.

Holding 10ft pole on the cam though

MilzyZ34 · 04-20-2005, 06:47 PM

Quote:

Originally Posted by NorKoastal

What is the average Install $$$ for the stage 1 ????? How many are left??

65-145 in parts depending how much you want to replace. labor most places will be 500-800. i'll do it for 400, maybe 350 if i need the money that day.

i believe there is 1, maybe 2 left, if you want one, now's the time.

FORTEEN3GT · 04-20-2005, 06:51 PM

Quote:

Originally Posted by MilzyZ34

i believe there is 1, maybe 2 left, if you want one, now's the time.

how many more are you ordering... and about the hp ratings?? where do you get them.

MilzyZ34 · 04-20-2005, 06:57 PM

Quote:

Originally Posted by FORTEEN3GT

I'll be the first to say it..... NICE site!

so I take it you have no problem with the cam supply... you are capable of filling all the orders you recieve off the site??

also how do you have numbers on "stage 1" 25-30 crank hp and "stage 2" 50 crank hp without dyno testing... or am i missing something here??

it would be nice to have a write up on the site of the cam install instructions as well.... along with an install kit with all the necessary components.

we will do what we have to do to keep up with the orders. in the beginning there might be a slight delay, but this shouldn't be an issue after a few sales. it's really a matter of deciding which bank i want to rob to come up with the money needed to order 50 custom cams at once.

i'm sorry about the hp estimates on there. i've been through the site so many times to make sure veerything is right, i guess i forgot to read through that one more time. i'll be sure to note that those are the "anticipated gains". as soon as i have something more concrete i will put it on there.

we have some cam install kits that i mentioned i think a page or two ago in this thread. i will have to figure out what we won't to do about the instructions, but i'll take it under consideration. maybe we'll include it with the install kit?

i wasn't aware that this board had rules for vendor's selling products on the site. since this board will be where most of my 3100/3400 customers are, it would definately be a priority to get setup on this board to be a sponsor.

MilzyZ34 · 04-20-2005, 07:02 PM

Quote:

Originally Posted by kubiache

Nice site. Questions though.

"Upgraded springs" and "Even further upgraded springs." Care to be more specific?

These are NOT regrinds, right?

How much testing went into this to determine how safe they are on a stock PCM?

Specs, man. You might as well make them known now that you've released the cams. How hard is it for someone to buy a cam and steal the specs if they want anyways?

Cam install kit?

what info do you want on the springs? install height, seat pressures, spring rate, wire diameter, number of coils?

we have no physical testing on these cams on a stock pcm, so we're basing how safe we think they are based on the stage 1 specs that we designed around a stock pcm and stock headflow.

specs - be patient, they will be on my site soon.

cam install kit is mentioned in the post above.

kubiache · 04-20-2005, 07:07 PM

Quote:

Originally Posted by MilzyZ34

what info do you want on the springs? install height, seat pressures, spring rate, wire diameter, number of coils?

we have no physical testing on these cams on a stock pcm, so we're basing how safe we think they are based on the stage 1 specs that we designed around a stock pcm and stock headflow.

specs - be patient, they will be on my site soon.

cam install kit is mentioned in the post above.

Pressure is what I was getting at. If they fit, they fit.

A cam is a pretty big mod to not test on first.

FORTEEN3GT · 04-20-2005, 07:12 PM

good point... how many cars have this cam??? zero????

MilzyZ34 · 04-20-2005, 07:16 PM

i install stage 2 heads and cam on a GA this weekend, and i'll be doing several more installs in the weeks to come.

Irate · 04-20-2005, 10:37 PM

Quote:

Originally Posted by MilzyZ34

i wasn't aware that this board had rules for vendor's selling products on the site. since this board will be where most of my 3100/3400 customers are, it would definately be a priority to get setup on this board to be a sponsor.

Sounds good. We have rules in place for vendors and we would love to have a sponsor who is capable of offering cam shafts to our members!

Feel free to PM either Jeremy or Ryan and they can give you more than enough info.

Jeremy · 04-21-2005, 06:14 AM

Closing thread til I hear from MilzyZ34. PM me or email webmaster@grandamgt.com

Jeremy · 04-26-2005, 07:53 PM

Thread reopened by me. Milzy's a sponsor now.

MilzyZ34 · 04-27-2005, 10:20 AM

Quote:

Originally Posted by GrandAmGuru

Thread reopened by me. Milzy's a sponsor now.

sweet.

we finished the install this weekend on sunday, scanned on monday, and the customer drove the car home that morning. the car flies for an NA 3400. the customer got a stage 2 package, and is very happy with it. he'll be posting up some vids as soon as he can. can't wait till we get some track results, but the buttdyno is off the charts. that stage 2 cam has a nice stumbly idle to it

FORTEEN3GT · 04-27-2005, 10:22 AM

bring on the dyno!

also.... you still need to update the site with a cam install kit.

MilzyZ34 · 04-27-2005, 10:31 AM

Quote:

Originally Posted by FORTEEN3GT

bring on the dyno!

also.... you still need to update the site with a cam install kit.

yeah i know.

my website builder has his last final today, i'm gonna bug him after that

atc3434 · 04-27-2005, 10:39 AM

I absolutely can't wait to see the results of this. It will defintely be the deciding factor in whether to stop modding, or go much deeper. Bring on the dyno numbers, and videos of course.

TheShizzy · 04-27-2005, 11:51 AM

Milzy, what other mods did this person have done to compliment the cam? If the Buttdyno is off the charts, it has to be a big gain! How long did it take for the install?

Schweppe23 · 04-27-2005, 12:04 PM

what year car was it installed on?

MilzyZ34 · 04-27-2005, 12:14 PM

Quote:

Originally Posted by Schweppe23

what year car was it installed on?

2003

04-20-2005, 06:35 PM	#261
kubiache Get blown Join Date: Feb 2003 Location: Grand Rapids, MI Age: 42 Posts: 1,858 Vehicle: 1998 GTP	Nice site. Questions though. "Upgraded springs" and "Even further upgraded springs." Care to be more specific? These are NOT regrinds, right? How much testing went into this to determine how safe they are on a stock PCM? Specs, man. You might as well make them known now that you've released the cams. How hard is it for someone to buy a cam and steal the specs if they want anyways? Cam install kit? __________________ Dave Woodward '01 GA SE --- 14.864 @ 92.61mph.....NA '98 GTP - NIC cam / P&P heads / 105# springs / Titanium retainers / INTENSE LW pushrods / CC Lifters / INTENSE TCS-300 / ZZP Poly mounts / RT 3" DP / PEMs / ZZP MPS 3.2, 3.0 / Wizair / 103s / DHP / AFC 2.2 .......still tuning

04-20-2005, 06:47 PM	#263
H.O. Driver I drive a V6 H.O. AKA: Timmah! Join Date: Aug 2002 Location: Boyne City, MI Age: 38 Posts: 2,694 Vehicle: 99 GT, 03 DTS, 04 SRX	Um, yea...... might not have to think about this. If its any consolation his stage 2 heads netted good numbers with Buckland's Monte. It did great on the dyno, but track he's still getting used to it. Holding 10ft pole on the cam though __________________ 1999 GA GT - lots of mods - Sold and missing it... 2001 GP GTP Special Edtion - Sold 2002 T/A - T-Tops, AT, LS6 intake, mainly stock - Sold 2003 Cadillac DTS - Gangsta Grandpa car - Gone 2004 Cadillac SRX - Baby hauler -Sold and missing it Life is too short to drive boring cars....why is that all I have now??????

04-20-2005, 07:12 PM	#269
FORTEEN3GT Texas's fastest GAGT AKA: Mike Join Date: Jul 2003 Location: by Dallas, Texas Age: 40 Posts: 1,871 Vehicle: 2001 GTP; 2000 WS6	good point... how many cars have this cam??? zero???? __________________ 9.42 1/8th Mile ET All-Motor! SOLD MODDED 1999 GAGT 2000 TRANS-AM WS6 M6 converted to TH400: 408, LS3 Heads,, True Duals, MTI Lid, Moser 9" rearend, Gemini 300 plate kit (800+rwhp of fun! 2001 GTP: PCM, 3.2 Pulley, VS Cam, 3 inch Downpipe/Exhaust, PEMs, U-bend, No-Cat, SLP Intake, and PowerTuner

04-20-2005, 07:16 PM	#270
MilzyZ34 Fastest FWD GA AKA: Mike Join Date: Aug 2003 Location: Dayton, OH Age: 41 Posts: 964 Vehicle: 1999 Grand Am GT	i install stage 2 heads and cam on a GA this weekend, and i'll be doing several more installs in the weeks to come. __________________ 1999 Z34 - Was a Stage 3 3800 Supercharged, but not fast enough so I have some new plans for her. 1999 Grand Am GT Race Car - 12.1 sec ET, STOCK motor, 10 psi http://www.milzymotorsports.com

04-21-2005, 06:14 AM	#272
Jeremy Unpimped my Mazda AKA: Jeremy Join Date: Aug 2002 Location: 'Burb of Chicago Age: 45 Posts: 1,828 Vehicle: 07 Tahoe LTZ ,12 Jetta	Closing thread til I hear from MilzyZ34. PM me or email webmaster@grandamgt.com __________________ Jeremy 12 VW Jetta 07 Tahoe LTZ 4x4 Over the firewall, out the antenna, into the router, shot to the modem, out the transponder, bounce into space, off the satellite, over their firewall, into the forums .... nothing but NET Last edited by Jeremy; 04-21-2005 at 06:21 AM.

04-26-2005, 07:53 PM	#273
Jeremy Unpimped my Mazda AKA: Jeremy Join Date: Aug 2002 Location: 'Burb of Chicago Age: 45 Posts: 1,828 Vehicle: 07 Tahoe LTZ ,12 Jetta	Thread reopened by me. Milzy's a sponsor now. __________________ Jeremy 12 VW Jetta 07 Tahoe LTZ 4x4 Over the firewall, out the antenna, into the router, shot to the modem, out the transponder, bounce into space, off the satellite, over their firewall, into the forums .... nothing but NET

04-27-2005, 10:22 AM	#275
FORTEEN3GT Texas's fastest GAGT AKA: Mike Join Date: Jul 2003 Location: by Dallas, Texas Age: 40 Posts: 1,871 Vehicle: 2001 GTP; 2000 WS6	bring on the dyno! also.... you still need to update the site with a cam install kit. __________________ 9.42 1/8th Mile ET All-Motor! SOLD MODDED 1999 GAGT 2000 TRANS-AM WS6 M6 converted to TH400: 408, LS3 Heads,, True Duals, MTI Lid, Moser 9" rearend, Gemini 300 plate kit (800+rwhp of fun! 2001 GTP: PCM, 3.2 Pulley, VS Cam, 3 inch Downpipe/Exhaust, PEMs, U-bend, No-Cat, SLP Intake, and PowerTuner

04-27-2005, 10:39 AM	#277
atc3434 Grand Am Again AKA: Andrew Join Date: Apr 2003 Location: Auburn, NY Age: 38 Posts: 1,999 Vehicle: 1999 Grand Am SE	I absolutely can't wait to see the results of this. It will defintely be the deciding factor in whether to stop modding, or go much deeper. Bring on the dyno numbers, and videos of course. __________________ 1999 Grand Am SE2 - Blue, TOG Headers, SLP Exhaust, DHP - SOLD 1996 Vert' Z-28 - M6, magnaflow muffler-back, K&N FIPK, Hurst Short-throw - 13.6 @ 103mph. 2006 Dodge Charger R/T Daytona - Go Mango Orange #2832 of 4000. Tune/exhaust. 14.009@97mph. 2002 Saab 9 5 Aero Wagon - 3" turboback/tune. 17psi of sleeper fun just waiting to surprise you.

04-27-2005, 11:51 AM	#278
TheShizzy Muwhahaha AKA: Sanjay aka Fes Join Date: Sep 2003 Location: Kalamazoo, Michigan Age: 37 Posts: 482 Vehicle: 91 Lexus LS400	Milzy, what other mods did this person have done to compliment the cam? If the Buttdyno is off the charts, it has to be a big gain! How long did it take for the install? __________________ 95 GAGT- 15.8 @ 86.9mph New money Pit - Ls400

04-27-2005, 12:04 PM	#279
Schweppe23 GAGT - Senior Member Join Date: Sep 2002 Location: Ohio Age: 41 Posts: 1,549 Vehicle: Pontiac	what year car was it installed on? __________________ First 99+ GAGT to run 14s First E/M (only) GA to run 13s First turbo'D GAGT to run 12s 11's coming soon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode