GrandAmGT.com Forum
http://www.pfyc.com GrandAmGT.com Premium Memership Signup
RedlineGoods.com   

Go Back   GrandAmGT.com Forum > GAGT - Technical - Sponsored by www.MilzyMotorSports.com > Technical Q&A

Reply
 
Thread Tools Display Modes
Old 09-03-2011, 02:00 PM   #1
street_fire
GAGT - Member
 
street_fire's Avatar
 
AKA: Ryan
Join Date: Jun 2009
Location: Windsor ON.
Age: 28
Posts: 848
Vehicle: 99 SC/T, 99 Dakota R/T
street_fire Gettin' there
side skirts screws and clips

Ok this the thing is pissing me off. I want to put on my SCT side skirts on but the those stuiped screws are messed on my stock side skirts. They won`t come out. I`m at the point of breaking everyone off. Am i going to break the molding by doin this. I can get push pins at work for free to replace the screws... The bolts on the bottom are fine it`s the screws on the side of the side skirts are the problem...

Unless i`m doin something wrong.
__________________
//) (\`\
/// `, ,`\\\
/ // '. `. . .' \\ \
/`/'' ''/` `:-- `--: `\'' ''\`\
/''/ / ///\`. ' ' . /\ \ \//
street_fire is offline   Reply With Quote
Old 09-03-2011, 09:46 PM   #2
AaronGTR
BlingWithBallz
 
AaronGTR's Avatar
 
AKA: Aaron
Join Date: Aug 2002
Location: Detroit area, MI
Age: 39
Posts: 12,221
Vehicle: 2000 Grand Am GT1 2dr
AaronGTR has made plenty of valid pointsAaronGTR has made plenty of valid points
Not sure which ones you are talking about. It's been a while since I took mine off... but from what I remember there where screws around the inside of the wheel arches, then a bunch of clips on the under side with pegs that go into notches on the back side of the side skirt. There is double sided tap behind it holding it on at the top edge though. You have to work the tape loose first, then pull the side skirt to unlock the notches from the clips. It can be quite difficult, and might even take two people.
__________________
The few, the proud, the boosted!
13.788 @ 103.73 mph (3/2011) 320 whp and 300 ft/lbs torque. (3/2011)
See it here. the total package.
AaronGTR is online now   Reply With Quote
Old 09-04-2011, 12:29 PM   #3
street_fire
GAGT - Member
 
street_fire's Avatar
 
AKA: Ryan
Join Date: Jun 2009
Location: Windsor ON.
Age: 28
Posts: 848
Vehicle: 99 SC/T, 99 Dakota R/T
street_fire Gettin' there
i having problems with the screw that are around the inside of the wheel arches... The screws are stripped and won't come out. I'm been thinkin just to just break them off some how but i'm worried about hurting the stock side skirts. Any suggections to take them off???
__________________
//) (\`\
/// `, ,`\\\
/ // '. `. . .' \\ \
/`/'' ''/` `:-- `--: `\'' ''\`\
/''/ / ///\`. ' ' . /\ \ \//
street_fire is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:57 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com
RedlineGoods.com